Cream Skin Care Cosmetic Emulsifying Machine
Cnc Aluminum Parts,Nc Aluminum Parts,Cnc Machined Part,Cnc Bicycle Accessories Huaying Chuang Precision Machinery Co., Ltd. , https://www.hycmetal.com
Â
Cosmetic Emulsifying machine is easy operation,steady capability good homogeneity,high efficiency,reasonable structure,smalll volume and high automation lebel and easily clean.
Our machine with five characteristics
MZH-5L Vacuum Emulsifying Mixer
NO
Name
Technical parameters
Main brand
1
Main pot
Design volume: 7.5L Â Â Working volume:5L
Â
2
Material &Thickness
Inner Layer:3mm (Polishing: 400MESH)
Cover: 5mm,
Stirring blade: 5mm,
SUS316L
Middle Layer: 3mm;
SUS 304-2B
Cotton insulation is expanded perlite
Â
Out Layer: 2mm (Polishing:300MESH)
SUS 304-2B
3
Technical Hole
Â
Pot Bottom: Discharge hole, Temperature detection hole.
Â
4
Stirring Way
Anchor agitator stirring scraper
SUS316L
Scraping blade PTFE material, snapping stirring the pot wall, so the material does not stick pot wall mixed.
Japan Sumitomo
There are two sets of stirring shaft mixing system, forward and reverse mixing, the mixing process can be up and down, left and right roll. Bearing brand NSK.
Japan NSK
Bottom temperature probe bulb to 20mm can accurately measure the temperature of the material. Temperature Sensor.
Japan Omron
Up-mixing Motor: 0.55KW;
Siemens
/ABB
Up-mixing Frequency control: 0~63r/min
Delta
5
Homogeneous
Homogenizer as SUS 316L solid stainless steel material, by laser machining process from several species such as helical vane cavity structure and the special work in strict accordance with Japan beauty he company to produce high precision, strong shear.
Japan Technology
Homogenizer Motor :0.55KW
Siemens
/ABB
Homogenizer Inverter: 0-2880r/min
Delta
6
Sealing
Dharma Blue sealed with silicone rubber O-ring
Germany Burgmann
Homogenizer using the world famous German high-speed Mchanical seal Burgmann.
China brand
Kettle with stirring using mechanical seal.
Â
7
Heating way
Steam heating, Water test pressure 0.4Mpa,working Pressure<0.09Mpa
Â
8
Discharge way
1.Vacuum pressure bottom valve discharge
 2. Handle wheel pour.
Â
Can through Variety pump or Pressure pump discharge.
Â
9
Vacuum System
Using water ring vacuum pump to avoid pump inhale oil, foam etc., causing blockage.
China famous brand Zibo
Vacuum pump Motor: 0.12KW
Â
Vacuum suction tube is 304-2BÂ connected.
Â
Water consumption of vacuum pump 68L/min
Â
10
Electric Box
Electrical control box for the SUS304-2B, Appearance of sand board.
Â
Control procedures for manual push-button, easy to operate.
Â
Main Eectric elements of world brand; Button by Japan Fuji,  Schneider or Omron for Meter and Sensor. One the control panel should be able to adjust and display the stirring speed, The pot temperature, The Temperature of the upper and lower limits control, Emulsification time and slow mixing time settings and other functions.
Schneider
/Omron
Net weight
150kg(Only for standard equipment)
Â
Power Voltage
380V,50HZ.
Â
GMP Standard
No platform,no oil and water pot,all the stainless steel contact with material is SUS316L stainless steel. Another place is SUS304-2B.
Â
 II. Machinery Main Parts
III. Our Factory
IV. The Main Project
V. After Sale Service
1. Warranty time: One year guaranteed for quality, product whole life service any damage except the wrong operation during warranty. Period is repaired freely, But the travel and hotel expenses should
be count on buyer.
2. Commissioning services: The product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Traning Services: Our engineers will train your staff in your factory or video to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4. Manintenance Services: Any malfunction happened, Once you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the material which used to the equipment and other documents video related to GMP authentication information will be provided by us.
Â
VI. FAQ
1. Q: Are you factory or trading company?
  A: We are the professional manufacture of cosmetic machinery in China more than 10years.
2. Q: Where is your location?
  A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai
      Province.
3. Q: Are your engineer be able to serve in oversea?
  A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
  A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
  A: Two years spare parts,and full-life service of our machinery.
Our Company to customer satisfaction for the development of three goals: Product quality, Product technology and After-sales service.