Hydraulic Metal Baler

Model NO.: Y81-1250
Normal Force of Door Cover Cylinder: 300kn
Stroke of Door Cover Cylinder: 980mm
Trademark: Zhenhuan
Transport Package: Bare in Container
Specification: 1 pc 40′ container
Origin: China
Model NO.: Y81-1250
Normal Force of Door Cover Cylinder: 300kn
Stroke of Door Cover Cylinder: 980mm
Trademark: Zhenhuan
Transport Package: Bare in Container
Specification: 1 pc 40′ container
Origin: China
Hydraulic Metal Baler Y81-1250
Hydraulic Metal Baler
 

I Description of this machine:
Y81 series of hydraulic metal balers are applicable in steel plants, recycling companies, ferrous & non-ferrous smelting industry to press metal scraps (steel, copper, aluminum, stainless steel, discarded automobiles) into acceptable fumace charges (shapes: cuboid; cylinder or octagon), so as to reduce cost of transportation, to increase speed of fumace charging.
II Main features:
1) Hydraulic drive for all machine types, manual valve control
2) No footing bolts needed in installation; diesel engine can be equipped for power.
3) Baling force : 125tons; productivity is 800-1500kgs per hour.
III Main technical data:
1 Main oil cylinder Model YG250/160-450 Qty. 1pc
Normal force 1250KN Stroke 450mm
2 Side pressure cylinders Model YG220/160-900 Qty. 1pc
Normal force 1000KN Stroke 900mm
3 Turning bag cylinder Model YG110/70-370 Qty. 1pc
Normal force 50KN Stroke 370mm
4 Door cover Cylinder Model YG125/80-980 Qty. 1pc
Normal force 300KN Stroke 980mm
5 Size of Feed box 1200×700×600mm
6 Size of Bale 300×300mm or 250×250mm
7 Single cycle time

S

 ~90
8 Motor Model Y160L-4 Rated power 15KW
Rated speed 1440rpm Qty. 1set
9 Working pressure 25MPa
10 Hydraulic pump Model 63YCY14-1B Rated pressure 31.5MPa
Nominal displacement 63ml/r Qty. 1pc
                   
IV Main configuration
4.1 High pressure oil pump: from Jiangsu, China
4.2 Motor: from Jiangsu, China
4.3 Low-voltage electrical components: Schneider
4.4 Limit switch: from Jiangsu, China
4.5 Cylinder seal: from Shenyang, China
4.6 Electro-hydraulic valve: from Jiangsu, China
4.7 Overflow valve: from Jiangsu, China
Hydraulic Metal Baler Y81-1250
Hydraulic Metal Baler
 

I Description of this machine:
Y81 series of hydraulic metal balers are applicable in steel plants, recycling companies, ferrous & non-ferrous smelting industry to press metal scraps (steel, copper, aluminum, stainless steel, discarded automobiles) into acceptable fumace charges (shapes: cuboid; cylinder or octagon), so as to reduce cost of transportation, to increase speed of fumace charging.
II Main features:
1) Hydraulic drive for all machine types, manual valve control
2) No footing bolts needed in installation; diesel engine can be equipped for power.
3) Baling force : 125tons; productivity is 800-1500kgs per hour.
III Main technical data:
1 Main oil cylinder Model YG250/160-450 Qty. 1pc
Normal force 1250KN Stroke 450mm
2 Side pressure cylinders Model YG220/160-900 Qty. 1pc
Normal force 1000KN Stroke 900mm
3 Turning bag cylinder Model YG110/70-370 Qty. 1pc
Normal force 50KN Stroke 370mm
4 Door cover Cylinder Model YG125/80-980 Qty. 1pc
Normal force 300KN Stroke 980mm
5 Size of Feed box 1200×700×600mm
6 Size of Bale 300×300mm or 250×250mm
7 Single cycle time

S

 ~90
8 Motor Model Y160L-4 Rated power 15KW
Rated speed 1440rpm Qty. 1set
9 Working pressure 25MPa
10 Hydraulic pump Model 63YCY14-1B Rated pressure 31.5MPa
Nominal displacement 63ml/r Qty. 1pc
                   
IV Main configuration
4.1 High pressure oil pump: from Jiangsu, China
4.2 Motor: from Jiangsu, China
4.3 Low-voltage electrical components: Schneider
4.4 Limit switch: from Jiangsu, China
4.5 Cylinder seal: from Shenyang, China
4.6 Electro-hydraulic valve: from Jiangsu, China
4.7 Overflow valve: from Jiangsu, China