10 Years Factory Organic Waste Gas Treatment Machine System
Technical parameter:
Â
Name
Air flow
Relative pump
Relative fan
Quantity of solvent
Weight of    column body and total
absorption   solvent
Model
m3/h
Pump
Motor
Fan
Motor
KG
KG
kw
kw
1
2000-2600
40FSB-15L
2.2
4-72Â 5A
1.2
840
1280
2
5000-6000
40FSB-20L
3
4-72Â 5A
2.2
1820
2420
3
8000-10000
50FSB-25L
4
4-72Â 6A
4
3200
3900
4
14000-15000
65FSB-32L
5.5
4-72Â 6C
7.5
4200
5000
5
18000-20000
80FSB-20L
5.5
4-72Â 7C
11
5400
6400
6
24000-26000
100FSB-32L
5.5
4-72Â 8C
15
6600
7800
7
30000-35000
100FSB-32
15
4-72Â 10C
18.5
7200
8200
8
40000-45000
1000FSB-32
15
4-72Â 10C
30
8100
12000
9
50000-60000
1000FSB-32
15
4-72Â 12C
37
10048
15000
 Introduction of two main type
A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor.Â
  B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.
Application:
 Â
 Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
 Alkali gas: NAOH, KOH, NHS etc.
 Organic gas: benzenes, alcohols, phenols.
 We used different absorption solvent for dealing with different harmful gas.
Equipment characteristics
· Low fuel consumption, and low operating cost. When organic matter reaches a certain concentration , its burning calories are enough to maintain the normal operation of the equipment without additional fuel.
· High purification efficiency, which is more than 96% ,98% and 99% respectively for two- chamber , three-chamber and multi- chamber rotation type structures
· No econdary pollution of common organic matter with CHO
· Even heat accumulating type temperature change , good heating effect, small hearth capacity, and low equipment cost
· Even and slow temperature rise in furnace , no pulse phenomena caused due to pressure change , small furnace loss , and long service life of equipment.
· Full-automatic control, simple operation, and stable, safe and reliableoperation.
· Compact structure and small footprint.
Â
Technical parameter:
Â
Name
Air flow
Relative pump
Relative fan
Quantity of solvent
Weight of    column body and total
absorption   solvent
Model
m3/h
Pump
Motor
Fan
Motor
KG
KG
kw
kw
1
2000-2600
40FSB-15L
2.2
4-72Â 5A
1.2
840
1280
2
5000-6000
40FSB-20L
3
4-72Â 5A
2.2
1820
2420
3
8000-10000
50FSB-25L
4
4-72Â 6A
4
3200
3900
4
14000-15000
65FSB-32L
5.5
4-72Â 6C
7.5
4200
5000
5
18000-20000
80FSB-20L
5.5
4-72Â 7C
11
5400
6400
6
24000-26000
100FSB-32L
5.5
4-72Â 8C
15
6600
7800
7
30000-35000
100FSB-32
15
4-72Â 10C
18.5
7200
8200
8
40000-45000
1000FSB-32
15
4-72Â 10C
30
8100
12000
9
50000-60000
1000FSB-32
15
4-72Â 12C
37
10048
15000
 Introduction of two main type
A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor.Â
  B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.
Application:
 Â
 Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
 Alkali gas: NAOH, KOH, NHS etc.
 Organic gas: benzenes, alcohols, phenols.
 We used different absorption solvent for dealing with different harmful gas.
Equipment characteristics
· Low fuel consumption, and low operating cost. When organic matter reaches a certain concentration , its burning calories are enough to maintain the normal operation of the equipment without additional fuel.
· High purification efficiency, which is more than 96% ,98% and 99% respectively for two- chamber , three-chamber and multi- chamber rotation type structures
· No econdary pollution of common organic matter with CHO
· Even heat accumulating type temperature change , good heating effect, small hearth capacity, and low equipment cost
· Even and slow temperature rise in furnace , no pulse phenomena caused due to pressure change , small furnace loss , and long service life of equipment.
· Full-automatic control, simple operation, and stable, safe and reliableoperation.
· Compact structure and small footprint.
Â