1/4 Inch 130c Normally Open Oil Solenoid Valve
SLS-Selective Laser Sintering technology, using 3D Printing materials: PA Series Nylon 3D Printing Material: Abrasion Resistance, High Strength and Stiffness, Good Chemical Resistance, Excellent Long-term Invariant Behavior, High Selectivity and Detailed Analysis, Biocompatibility in accordance with EN ISO 10993-1 and USP, and in accordance with EU Plastics Directive approved for food contact. Typical applications of this material are the highest quality of fully functional plastic parts. But the surface is relatively rough. There are also PA3200GF nylon fiberglass materials for deep drawing dies or any other applications requiring specific stiffness, high thermal deformation temperature and low wear; typically used in aluminium-filled nylon materials for metallic appearance and thermal load parts. At present, desktop LS laser sintering PA12 nylon powder material is also an option. Selective Laser Sintering,3D Printing Pa Material,Auto Door Accessories Parts,Selective Laser Sintering Prototype Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com
Characteristic
 Kveina Direct acting mini construction at low power consumption
 Compact desgin to save the space  Applied to low pressure system,open from 0 bar
Medium
 Air, water, steam, oil
Temperature
 NBR seal:-5 to 80 degree
 EPDM seal:-10 to 120 degree  VITON seal:-10 to 150 degree  PTFE seal:-20 to 200 degree
Pressure
 HK21:0.0Mpa to 1.6Mpa
Port size
 1/8" to 1/4"
Port thread
 BSPP, BSPT, NPT
Orifice(mm)
 1.6,2.0,2.5,3.0,3.5,4.0,5.0
Voltage
 DC-12V, 24V, 36V
 AC-12V, 120V,240V/60Hz; 110V;220V/50Hz
Tolerance
 +/-10%
Coils
 S91B, 22VA(AC), 17W(DC), IP65, 100%ED
 SA11B, 9VA(AC), 6W(DC), IP65, 100%ED  NASS coil 0543 on request
Material
 Body:brass or stainless steel
 Seal:VITON, NBR, EPDM, PTFE  Armature Tube:Stainless steel 304  Plunger:stainless steel 430F  Stop:SS403F  Springs:SS304  Shading Rings:Stainless steel 304
Pay attention to
To avoid unnecessary damage and destroy of machine and equipment, so pls read this carefully:
1.Before u assemble the product, u should know its working condition and necessary protection procedures.
2.Pls use the product according to appliance instruction, especially when u use it for gas, or petal which is easy tp explode, and use it in the condition with high temp or high humidity or corrosive, u should choose suitable items.
3.It is important to choose suitable items, right power, right voitage, right specification is the premise of long life of product.
FAQ
Packing
Transparent plastic bag +Â white small box +Â neutral carton +Â pallet
Custom packaging are available, Kveina brand packaging are available
Shipping :
Export port:Ningbo or Shanghai, China
Shipping way:By sea, by air, by air courier
Delivery time 1Â days to 45 days depends on actual orders.
Payment Terms
Accept T/T, L/C, Paypal, western union,etc.
Samples Policy
For regular coil below 5Â pcs, free samples against your courier account or you pick up from us.
For custom items, will discuss by email.
Return Policy
Assure you 1Â year policy after shipment.If there is any problem during this period, please contact us for support.
Company Info
Established in 1991, Ningbo Kveina Electronic Technology Co., Ltd (the former Fenghua Kai Ri Pneumatic Machinery Manufactory Co., Ltd is a factory that specializes in manufacturing various solenoid coils, ex-proof solenoid coils, engineering hydraulic pressure coils,  solenoid connectors and other solenoid valve components.
At present, Kveina's products are widely applied in pneumatic hydraulic pressure industry, food refrigerating industry, crude oil industry, de-dusting, engineering machinery, textile, automobile, medical technology, process technology, controlling technology, environmental technology and other fields, and are sold to Northern America, Southern America, Europe, Southeast Asia, the Middle East, Japan and other places, providing clients with products of numerous standards.Our company has numerous advanced winding machines, Injection Molding machines and monitoring &Â testing equipment, so as to guarantee that we can provide custom-made, professional and perfect solutions and products with high qualities to different clients from different countries.
After developing for years, the company invested millions of yuan in constructing a standardized production base in Fenghua Private Scientific & Technological Park, Ningbo, covering an area of 15,000 square meters.The company has successfully passed the ISO9001:2001 QMSC, the Conformité Européenne (CE), and ISO/TS16949.In 2013, the ex-proof series products passed the newly introduced ex-proof standards and achieved the newly introduced certificate and ec-proof certificate, becoming a legitimate enterprise with "two certificates" required by the national technical monitoring bureau and providing strong support to the products' qualities.Taking "Satisfy clients and win over the market" as our core concept for operation, we constantly expand the market and are deeply trusted and believed by clients.Our company has a strong ability of carrying out scientific researches.We have established a detection team, lab, and scientific research team, introduce internationally advanced scientific and technical guidance, automatic production process, lean production and processing, intensive on-site management and humanistic post-sales service.We pursue the concept of "Reliability, technicality and service.
Characteristic
 Kveina Direct acting mini construction at low power consumption
 Compact desgin to save the space  Applied to low pressure system,open from 0 bar
Medium
 Air, water, steam, oil
Temperature
 NBR seal:-5 to 80 degree
 EPDM seal:-10 to 120 degree  VITON seal:-10 to 150 degree  PTFE seal:-20 to 200 degree
Pressure
 HK21:0.0Mpa to 1.6Mpa
Port size
 1/8" to 1/4"
Port thread
 BSPP, BSPT, NPT
Orifice(mm)
 1.6,2.0,2.5,3.0,3.5,4.0,5.0
Voltage
 DC-12V, 24V, 36V
 AC-12V, 120V,240V/60Hz; 110V;220V/50Hz
Tolerance
 +/-10%
Coils
 S91B, 22VA(AC), 17W(DC), IP65, 100%ED
 SA11B, 9VA(AC), 6W(DC), IP65, 100%ED  NASS coil 0543 on request
Material
 Body:brass or stainless steel
 Seal:VITON, NBR, EPDM, PTFE  Armature Tube:Stainless steel 304  Plunger:stainless steel 430F  Stop:SS403F  Springs:SS304  Shading Rings:Stainless steel 304
Pay attention to
To avoid unnecessary damage and destroy of machine and equipment, so pls read this carefully:
1.Before u assemble the product, u should know its working condition and necessary protection procedures.
2.Pls use the product according to appliance instruction, especially when u use it for gas, or petal which is easy tp explode, and use it in the condition with high temp or high humidity or corrosive, u should choose suitable items.
3.It is important to choose suitable items, right power, right voitage, right specification is the premise of long life of product.
FAQ
Packing
Transparent plastic bag +Â white small box +Â neutral carton +Â pallet
Custom packaging are available, Kveina brand packaging are available
Shipping :
Export port:Ningbo or Shanghai, China
Shipping way:By sea, by air, by air courier
Delivery time 1Â days to 45 days depends on actual orders.
Payment Terms
Accept T/T, L/C, Paypal, western union,etc.
Samples Policy
For regular coil below 5Â pcs, free samples against your courier account or you pick up from us.
For custom items, will discuss by email.
Return Policy
Assure you 1Â year policy after shipment.If there is any problem during this period, please contact us for support.
Company Info
Established in 1991, Ningbo Kveina Electronic Technology Co., Ltd (the former Fenghua Kai Ri Pneumatic Machinery Manufactory Co., Ltd is a factory that specializes in manufacturing various solenoid coils, ex-proof solenoid coils, engineering hydraulic pressure coils,  solenoid connectors and other solenoid valve components.
At present, Kveina's products are widely applied in pneumatic hydraulic pressure industry, food refrigerating industry, crude oil industry, de-dusting, engineering machinery, textile, automobile, medical technology, process technology, controlling technology, environmental technology and other fields, and are sold to Northern America, Southern America, Europe, Southeast Asia, the Middle East, Japan and other places, providing clients with products of numerous standards.Our company has numerous advanced winding machines, injection molding machines and monitoring &Â testing equipment, so as to guarantee that we can provide custom-made, professional and perfect solutions and products with high qualities to different clients from different countries.
After developing for years, the company invested millions of yuan in constructing a standardized production base in Fenghua Private Scientific & Technological Park, Ningbo, covering an area of 15,000 square meters.The company has successfully passed the ISO9001:2001 QMSC, the Conformité Européenne (CE), and ISO/TS16949.In 2013, the ex-proof series products passed the newly introduced ex-proof standards and achieved the newly introduced certificate and ec-proof certificate, becoming a legitimate enterprise with "two certificates" required by the national technical monitoring bureau and providing strong support to the products' qualities.Taking "Satisfy clients and win over the market" as our core concept for operation, we constantly expand the market and are deeply trusted and believed by clients.Our company has a strong ability of carrying out scientific researches.We have established a detection team, lab, and scientific research team, introduce internationally advanced scientific and technical guidance, automatic production process, lean production and processing, intensive on-site management and humanistic post-sales service.We pursue the concept of "Reliability, technicality and service.