Fruit Sea Food Fish Dryer with Ce
Screw chiller is called screw chiller because of its key component-compressor. The unit is made of gas refrigerant from the evaporator; after the compressor is adiabatically compressed, it becomes a high temperature and high pressure state. The compressed gas refrigerant is cooled and condensed in the condenser at equal pressure, and after condensing, it changes into a liquid refrigerant, and then expands to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the material to be cooled in the evaporator and becomes gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. The principle flow of screw chiller is divided into air cooling and water cooling. Water Cooled Screw Chiller,Screw Water Chiller,Water Cooled Screw Compressor Chiller,screw top water cooler,screw water cooled liquid chiller,water cooled screw chiller trane,Water cooled flooded screw chiller, Screw type water chiller plant‎ Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com
Descriptions:
Hot air circulation drying machine is the first domestic product, carefully designed by our company, constantly updated,reach the international advanced level, the device is a kind of body type, and can be put down, is divided into type "CT"(centrifugal fan), computed tomography "CTC" (axial flow fan) series of products, it is the use of steam and electricity as the heat source, through the heater to heat, a lot of hot air circulation in the machine body, after continuous air supply from the air inlet into the box, and then continuously discharge the humidity from wet outlet, this increases the heat transfer effect, to gradually reduce the material moisture in the cabinet. Our company produces the drying machine with low noise, high temperature resistant axial flow fan and automatic temperature control system, the entire circulatory system closed, let the traditional thermal efficiency of oven chamber 3-7% increased to the current 35-40%, the highest thermal efficiency can reach 70%.
Applications:
Hot air circulation drying oven is a kind of wide applicable shelf intermittent drying equipment, widely used in pharmaceutical, chemical, food, light industry and other industrial raw materials or products of dehumidification. For example: active pharmaceutical ingredients, Chinese medicine decoction pieces, powder, granule, crude drug, drug packing bottle, pigment, dyestuff, dehydration vegetable, food, plastic resin, electric elements, salt, paper, leather, wool, catalyst materials dry etc...
Features:
1. Most of the hot air in the circulation, high thermal efficiency. To save energy.
2.Use of forced ventilation effect, equips with adjustable air distributing plate, uniform material drying, heat source can use steam, hot water, electricity, far infrared, choose widely.
3. The machine noise is small, running balance, temperature control, easy installation and maintain.
4. Applicability is wide and can dry various materials, it is general drying equipment.
Technical Specifications:
Â
Model
Capacity
(kg/time)Power
(kw)Consumption of steam
(kg/h)Cooling area
(m2)Air
Volume
(m3/h)Temperature
Difference
(ºC)Qty
Of plateOuter size
W*D*H
(mm)Qty of
Drying car
BG-14-C
120
0.38
18
20
3450
±2
48
2300*1200*2300
2
BG-27-C
240
0.76
36
40
6900
±2
96
2300*2200*2300
4
BG-41-C
360
1.14
54
80
10350
±2
144
2300*3220*2000
6
BG-54-C
480
1.52
72
100
13800
±2
192
4460*2200*2290
8