Manual Permanent Magnet Lifter 2000kg with Ce/GS
CNC Turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material to create the desired shape. A turret (shown center), with tooling attached is programmed to move to the bar of raw material and remove material to create the programmed result. This is also called [subtraction machining" since it involves material removal. If the center has both tuning and milling capabilities, the rotation can be stopped to allow for milling out of other shapes.
Precision Cnc Turning,Performance Shaft,Stainless Steel Shaft,Aluminum Auto Parts Yihua Precision Machining Co, Ltd. , https://www.yhmachining.com
Product Description
Permanent Lifting magnet( magnetic lifter) is a manual tool, which is used for lifting or transporting flat, round surfaces steels or other ferrous work pieces . Since it holds objects by magnet, differ from normal method by grabbing and squeezing , cause no  damage to objects being lifted.Which is especially suitable for fragile and thin-wall structure objects. Normally it is used with crane.
It is widely used in lifting and transporting finished, half-finished work pieces in factory, dock, warehouse and transportation .
Detailed Technical Specifications
Name: Lifting magnet/magnetic lifter
Main Part Material: Steel
Magnet Material:Â Nd-Fe-B
Handle:Integral/Rubber covered
Coating: Nickel
Packing: Wooden
Tolerance:+/-0.05mm
Rated Capacity:2000kgÂ
Max Break Force:7000kg
Certification: CE/GS/ISO9001
Working Temp:-45-+80 Degree
Application: Warehouse, Crane, Construction,Transportation,etc.
Optional Pulling Force: 100kg ,400kg ,600kg ,1t ,2t ,3t ,4t,5t
Warranty: 12 months
Export Markets: Global
Features
Lifting Magnet/Magnetic Lifter Specification Chart
Model
Capacity
(kg)Size (mm)
NW
(kg)GW
(kg)Package
L×W×H (mm)
L
H
B
R
JG-100
100
123
62
67
170
3
4
240×160×160
JG-400
400
195
95
92
210
10
11
320×200×170
JG-600
600
246
120
115
243
20
22
370×230×230
JG-1000
1000
298
153
135
270
36
39
430×280×240
JG-2000
2000
395
172
165
370
70
73
520×300×310
JG-3000
3000
480
175
165
370
88
92
600×300×310
JG-5000
5000
570
230
215
600
198
213
730×400×480
Â
Method of use Before hoisting, check and remove dirt on parts to be hoisted to grantee parts clean and flat. Then put the part under lifting magnet and make lifter's central line coincident with part's center of gravity.Turn the handle lever from "-" to "+" position until it reaches limit pin and check if the safety pin on the lever is at right position. After these steps, the lifter could be lifted(usually by lyfoo).If lifting round parts, the outline of part should contact both the two line of "V" gutter and weight should be no more than 30-50% of lifter's rated lifting capacity.People mustn't stay below lifting magnet and working temperature should not exceed 80 degree, no vibration and impact.After use, press button on handle lever to detach safety pin of step 1. Then turn the lever to "-" position, separate work piece from lifter to finish operation.
    1. Read instructions carefully before using. Contact us if any unclear.Â
    2. Avoid collision of the lifter to achieve longer lifespan and better performance.
    3. Check movable parts frequently, if it is not use for a long time, smear anti-rust oil on working surface.Â
Note !
     Never stand under the object being lifted. Always pay extra caution when hoisting.
    The surface of the objects being lifted should keep clean and free of chips, oil,slag,dirt,etc. Lifting magnets must be centered on work pieces being loaded.Hoisting painted or finish coated surfaces is not recommended.
Contact US
    Contact person: Jake.su(Mr, Sales)
    Phone: +86 180 1049 6004Â
Â
    Website: http://toyalift.en.made-in-china.com/
    Address: Dong Lv Industry area, BaoDing, HeBei province, China
