Chain Type Manual Stripper Machine
Electric Counter Balance Forklift
Zowell electric counterbalance forklift is a material handling for
both indoor and outdoor use. The
fork is set outside the center line of front wheel. With the counterbalance
installed at the tail, this forklift can easily offset the weight of goods. The
counter balanced forklift equipped with pneumatic tire to ensure operation
speed and gradeability. It is widely used in loading, unloading, stacking and
transporting finished goods in ports, stations and factory. Counterweight
forklift within 3 tons can also operate in cabins, train compartments and
containers.
Safe, efficiency, comfortable, no
pollution are key features and targets of Zowell counter balanced forklift as
well as other products. Ergonomical design on
rear-position multi-valve and bias layout of instrument panel, makes operation safer. The ultra-low torque steering system greatly
improves the reliability of steering. Besides, full range
of customized attachment choices such as side shift, fork positioner, bale
clamp, stabilizers, full closed cabin and heater can also be added into solid and
scalable body.
The load capacity
of FE counterbalanced forklifts ranges from 1500kg to 3500kg. The maximum lift
height is 6000mm. If you have bigger load capacity or other need, please
contact us for a professional help.
Lonking forklift,Linde forklift,Big material handling,port goods transport Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.zowellforklift.com
Specification
   Â
Item
Specification
Speed
2500 rpm
Min Stripping Edge
10 mm
Paper Range
200gsm-500 gsm cardboard,  3 ply-5ply corrugated sheet
Air Pressure
0.65 Mpa-0.8Mpa
Net Weight
3.25KG
Dimensions( L×W×H)
480×270×180mm (carton package)
ZQ-801 Paper Range
Cardboard ,E corrugated sheet
ZQ-802 Paper Range
E,B,V,F corrugated sheet
ZQ-803 Paper Range
3,5,7 ply corrugated sheet
 Function
       The machine is used for strip off waste edges of die-cut cardboard, thin/ordinary corrugated paper.
Main Features
     a) Safe and durable:Â
The pneumatic motor is imported from Taiwan and equipped with double safe switch to ensure the safety of the operator. Teeth Chain adopts high-strength chromium and molybdenum alloy by heat treatment-- durable, long life span with easy and fast spare parts change. It produced according to the CE standard.
     b) Easy Operate:
The structure is light, compact and user friendly- only short time training can operate for male or female operators.
Â
     c) High Efficiency and less waste:
The machine is high efficient equipment; the efficiency can be 5-10 times higher than the manual one and no damages to the products.
V. Â Accessories and Spare Parts of the Machine:
Spare parts: 5 meters plastic pipe, 1 oil-water separator, 1set internal hexagonal spanner, 1 open wrench, one pair of pipe connector.
Stripping Machine
Specification
   Â
Item
Specification
Speed
2500 rpm
Min Stripping Edge
10 mm
Paper Range
200gsm-500 gsm cardboard,  3 ply-5ply corrugated sheet
Air Pressure
0.65 Mpa-0.8Mpa
Net Weight
3.25KG
Dimensions( L×W×H)
480×270×180mm (carton package)
ZQ-801 Paper Range
Cardboard ,E corrugated sheet
ZQ-802 Paper Range
E,B,V,F corrugated sheet
ZQ-803 Paper Range
3,5,7 ply corrugated sheet
 Function
       The machine is used for strip off waste edges of die-cut cardboard, thin/ordinary corrugated paper.
Main Features
     a) Safe and durable:Â
The pneumatic motor is imported from Taiwan and equipped with double safe switch to ensure the safety of the operator. Teeth Chain adopts high-strength chromium and molybdenum alloy by heat treatment-- durable, long life span with easy and fast spare parts change. It produced according to the CE standard.
     b) Easy Operate:
The structure is light, compact and user friendly- only short time training can operate for male or female operators.
Â
     c) High Efficiency and less waste:
The machine is high efficient equipment; the efficiency can be 5-10 times higher than the manual one and no damages to the products.
V. Â Accessories and Spare Parts of the Machine:
Spare parts: 5 meters plastic pipe, 1 oil-water separator, 1set internal hexagonal spanner, 1 open wrench, one pair of pipe connector.
