Truck Mounted Full Hydraulic Water Well Mud Rotary Drilling Rig Machine
JKCS600 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad. Specification                                                                                General 1 Geology drilled All kinds 2 Drilling Type DTH & Mud Rotary 3 Drill system and operation Hydraulic 4 Hole Diameter mm Φ140-Φ450 5 Hole Depth m 600 6 Rotation Torque Nm 6500   1st Gear 13000  2nd Gear 7 Rotation Speed rpm 0-80   1st Gear 0-160  2nd Gear 8 Drill pipe diameter mm 89/114 9 Drill pipe length mm 4000/4500 10 Axial pressure T 10 Winch 11  Max. Lifting force T 32 12 Lifting force of Main winch(Optional) T 4 13 Lifting force of hoist T 1.5 14 Length of steel wire rope(tool winch) m 100 15 Lifting height of tool winch m 8 Engine 16 Diesel Engine type CUMMINS 17 Rated Horse power  Kw 132 18  Electrical System 24 Compressor required 19  Compressor Type Rotary Screw/Movable 20 Pressure Required Mpa 1.05-6.9 21 Air consumption m³/min 16-96 Truck 22 Manufacturer SINOTRUCK HOWO 23 Model ZZ1257M5841W 24 Engine WD615.62 25 Rated Horse power kw 196 26 Discharge Standard EU-2 27 Drive type 6*4 28 Max.Speed Km/h 102.9 29 Steering wheel left/right(Optional) Mud Pump 30 Type Hydraulic 31 Model BW450 32 Stroke mm 110 33 Displacement L/Min 450 34 Discharge pressure (Mpa) Mpa 2-3 35 Suction tube diameter mm 89 36 Discharge pipe diameter mm 51 37 Liner Diameter mm 80 Generator 38 Generator Optional Dimension 39 Net Weight T 22 40  Shipping Length mm 10500 41 Shipping Width mm 2480 42 Shipping Height mm 3650 43  Working size(L*W*H) mm 11000*2480*7147 Service                                                                                JKCS600 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad. Specification                                                                                General 1 Geology drilled All kinds 2 Drilling Type DTH & Mud Rotary 3 Drill system and operation Hydraulic 4 Hole Diameter mm Φ140-Φ450 5 Hole Depth m 600 6 Rotation Torque Nm 6500   1st Gear 13000  2nd Gear 7 Rotation Speed rpm 0-80   1st Gear 0-160  2nd Gear 8 Drill pipe diameter mm 89/114 9 Drill pipe length mm 4000/4500 10 Axial pressure T 10 Winch 11  Max. Lifting force T 32 12 Lifting force of Main winch(Optional) T 4 13 Lifting force of hoist T 1.5 14 Length of steel wire rope(tool winch) m 100 15 Lifting height of tool winch m 8 Engine 16 Diesel Engine type CUMMINS 17 Rated Horse power  Kw 132 18  Electrical System 24 Compressor required 19  Compressor Type Rotary Screw/Movable 20 Pressure Required Mpa 1.05-6.9 21 Air consumption m³/min 16-96 Truck 22 Manufacturer SINOTRUCK HOWO 23 Model ZZ1257M5841W 24 Engine WD615.62 25 Rated Horse power kw 196 26 Discharge Standard EU-2 27 Drive type 6*4 28 Max.Speed Km/h 102.9 29 Steering wheel left/right(Optional) Mud Pump 30 Type Hydraulic 31 Model BW450 32 Stroke mm PVC Steering Wheel Cover,Convenient PVC Steering Wheel Cover,Safe PVC Steering Wheel Cover,Cheap PVC Steering Wheel Cover Ninghai Chunye Car Accessories Co.,ltd. , http://www.chunyeauto.com
JKCS600
Application                                                                                
JKCS600 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1.The drilling rig can use air DTH Hammer drilling and mud drilling.Â
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the 8X4 special crane chassis of brand Sinotruck Howo and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a Cummins engine,132kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head, have two gear, rotation speed is 0-80 and160rpm stepless adjustment and the rotary torque is 6500-13000Nm.
Â
Â
Â
Volt
Â
Â
Â
Â
Â
Â
Â
Â
Â
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
JKCS600
Application                                                                               Â
JKCS600 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1.The drilling rig can use air DTH Hammer drilling and mud drilling.Â
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the 8X4 special crane chassis of brand Sinotruck Howo and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a Cummins engine,132kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head, have two gear, rotation speed is 0-80 and160rpm stepless adjustment and the rotary torque is 6500-13000Nm.
Â
Â
Â
Volt
Â
Â
Â
Â
Â
Â
Â
Â
Pvc Steering Wheel Cover is made from PVC material, namely Polyvinylchlorid, it is one of the world's largest output of plastic products, so it is cheap and used widely!
The features of PVC material: 1. Light weight, insulation, thermal insulation, moisture-proof, flame retardant, acid, corrosion-resistant. 2. good Stability, good dielectric properties, durability, anti-aging and easy welding and bonding.