China Competitive Price Equipment Underground Pipe Electric Cable Fault Locator
RFJA33 air jet terry weaving machines are the first manufacturer of air jet terry looms in China.It succeed the technology of RFJA series air jet looms, is a model of High Speed Air Jet terry looms with the design concept of high speed. lower consumption and wide weaving range. With the perfect performance of high speed and wide weavability, it becomes one of the best Towel Weaving Machine in the word.It is designed through completely new three-dimension technology, computer analysis & assembly, and utilized the virtual technology in designing of the insertion, shedding, beating and looping.
1) Solid frame and super high speed.
2) Middle support of sley shaft.
3) Drive-super motor.
4) Looping is controlled accurately by servo motor
5) Up mounted temples
Air Jet Terry Weaving Machine,Terry Towel Weaving Machine,Textile Weaving Machine,Brother Knitting Machine RIFA TEXTILE MACHINERY CO.,LTD , http://www.rifatex.com
I. Introduction of China Manufacturer High Quality Cable Fault Tester
1. It is a one body trolley structure, easy handling at site.
2. You can do site test without complex wiring, because all test modes and switching voltage levels are automatically switched by weak control internal high-voltage switches.
3. It can quickly locate and point low resistance, high impedance fault leakage, flashover faults in power cable with a variety of 220V-220KV voltage level.
II. Characteristics of China Manufacturer High Quality Cable Fault Tester
1. It integrates multi-gear DC high-voltage generator, multi-gear high-voltage capacitor, arc-stabling units and a variety of signal acquisition in one body, which facilitates fault location operation.
2. Switching between three gear test modes, two gear voltage levels is controlled by low-voltage weak electricity.
3. World's leading test method makes difficult fault detecting become very simple.
4. The requirement to operators' level for technical equipment is low.
5. The DC voltage is up to 32kV.
6. Each stall of voltages, which is 16 / 32kV, can output up to 1536 J impact energy. It has longer ranging delay arc time and makes a loud voice on the fault point when locating.
7. It can do high impedance fault detection directly without burning.
8. Large wheels ensure a smooth, easy handling and site work.
III. General Parameters of China Manufacturer High Quality Cable Fault Tester
Â
Place of Origin
Hebei, China (Mainland)
Brand Name
HZ
Model Number
Hz-4000t2
DC Voltage Output
0-32kv 0-16kv
Output Energy
1536j
Impact Capacitor
3UF 12UF
Certificate
CE ISO
Voltage Level
220V-220kv
Structure
a One Body Trolley
Warranty
1 Year
IV. Photos of China Manufacturer High Quality Cable Fault Tester
V. Company Information
We are ISO and CE certificated manufacturer and the brother company with Huazheng Electric. Besides electrical testing equipments, we also deal with ADSS/OPGW hardware fittings, indoor/outdoor vacuum circuit breakers, insulators, bird repellers, etc.
Warmly welcome worldwide customers to cooperate with us. You will be deserved with the high qualified products, favorate price, on-time delivery and our best service.
VI. Technical Indicators of China Manufacturer High Quality Cable Fault Tester
1. Test methods: Arc reflection method, current sampling, and DC output.
2. Types of sampling signals: Arc reflection method, current sampling, and low-voltage pulse.
3. DC voltage output:
  0 ~ 32kV Negative  Maximum output current: 76mA
  0 ~ 16kV Negative  Maximum output current: 152mA
4. Impact capacitor:
  0 ~ 32kV 3μF Maximum output energy: 1536 joules
  0 ~ 16kV 12μF Maximum output energy: 1536 joules
5. Ball-gap discharge: Weak electricity control. Discharge cycle can be adjusted within 3-12 seconds. It has   a specially designed silencer, which meets the requirement of silence when fault happened to the initial   endcable.
6. Protection:
  Zero voltage position protection: To prevent misuse, and to protect the safety of personal and the test   product;
  Press "off" button, and it will release the remaining charge automatically through safety instrument inside to ensure safety.
7. It is equipped with extension cable tray, which can be composed of automotive cable fault location system.
VI. Exhibition
VII. Customer Visit
VIII.Similar Recommendation
TDR Cable Fault locator Cable Fault Pin Pointer Cable Route Tracer Cable Identificator
I. Introduction of China Manufacturer High Quality Cable Fault Tester
1. It is a one body trolley structure, easy handling at site.
2. You can do site test without complex wiring, because all test modes and switching voltage levels are automatically switched by weak control internal high-voltage switches.
3. It can quickly locate and point low resistance, high impedance fault leakage, flashover faults in power cable with a variety of 220V-220KV voltage level.
II. Characteristics of China Manufacturer High Quality Cable Fault Tester
1. It integrates multi-gear DC high-voltage generator, multi-gear high-voltage capacitor, arc-stabling units and a variety of signal acquisition in one body, which facilitates fault location operation.
2. Switching between three gear test modes, two gear voltage levels is controlled by low-voltage weak electricity.
3. World's leading test method makes difficult fault detecting become very simple.
4. The requirement to operators' level for technical equipment is low.
5. The DC voltage is up to 32kV.
6. Each stall of voltages, which is 16 / 32kV, can output up to 1536 J impact energy. It has longer ranging delay arc time and makes a loud voice on the fault point when locating.
7. It can do high impedance fault detection directly without burning.
8. Large wheels ensure a smooth, easy handling and site work.
III. General Parameters of China Manufacturer High Quality Cable Fault Tester
Â
Place of Origin
Hebei, China (Mainland)
Brand Name
HZ
Model Number
Hz-4000t2
DC Voltage Output
0-32kv 0-16kv
Output Energy
1536j
Impact Capacitor
3UF 12UF
Certificate
CE ISO
Voltage Level
220V-220kv
Structure
a One Body Trolley
Warranty
1 Year
IV. Photos of China Manufacturer High Quality Cable Fault Tester
V. Company Information
We are ISO and CE certificated manufacturer and the brother company with Huazheng Electric. Besides electrical testing equipments, we also deal with ADSS/OPGW hardware fittings, indoor/outdoor vacuum circuit breakers, insulators, bird repellers, etc.
Warmly welcome worldwide customers to cooperate with us. You will be deserved with the high qualified products, favorate price, on-time delivery and our best service.
VI. Technical Indicators of China Manufacturer High Quality Cable Fault Tester
1. Test methods: Arc reflection method, current sampling, and DC output.
2. Types of sampling signals: Arc reflection method, current sampling, and low-voltage pulse.
3. DC voltage output:
  0 ~ 32kV Negative  Maximum output current: 76mA
  0 ~ 16kV Negative  Maximum output current: 152mA
4. Impact capacitor:
  0 ~ 32kV 3μF Maximum output energy: 1536 joules
  0 ~ 16kV 12μF Maximum output energy: 1536 joules
5. Ball-gap discharge: Weak electricity control. Discharge cycle can be adjusted within 3-12 seconds. It has   a specially designed silencer, which meets the requirement of silence when fault happened to the initial   endcable.
6. Protection:
  Zero voltage position protection: To prevent misuse, and to protect the safety of personal and the test   product;
  Press "off" button, and it will release the remaining charge automatically through safety instrument inside to ensure safety.
7. It is equipped with extension cable tray, which can be composed of automotive cable fault location system.
VI. Exhibition
VII. Customer Visit
VIII.Similar Recommendation
TDR Cable Fault locator Cable Fault Pin Pointer Cable Route Tracer Cable Identificator 