High Efficiency Slag Dryer Machine/ Slag Drier with Good Price
Rebar shear is the ideal solution for cutting all ferrous waste materials and in particular for reducing the volume of steel and various metals. Equipped with 4-edge blades driven by a special hardened steel hydraulic cylinder that allows high productivity at low costs, the alligator shears are also provided with a special geometry designed to always develop, in all work phases, the maximum cutting force. Characterized by numerous innovative elements that make them unique, the crocodile shears are the result of meticulous and careful research and development that the company reserves for each of its products, with a view to an ever-increasing attention to the customer.
Rebar Shear, Rebar Shearing Machine, Steel Rebar Shear, Steel Bar Shear, Bar Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycling.com
slag dryer performance characteristics
1.slag dryer has great handling ability, fuel consumption less, low drying cost.
2.High temperature resistant, this dryer can use high temperature and hot air to dry materials rapidly.
3.slag dryer expanded ability is strong, design considered production surplus, even if yield increased slightly, also need not changing equipment.
4.slag dry adopts "self-aligning type" tug structure,tug match up well with rolling ring, and greatly reduce wear and power consumption.
5.Special designed catch wheel structure, greatly reduces tilt of the equipment
 which work provides the horizontal thrust.
6.Environmental protection.
7.Dry and moisture control, minimum up to 5% or less, meet material widely.
slag dryer operating principle
1. A rolling cylinder which slightly inclines is the main part of slag dryer. The wetÂ
materials are fed from the higher end of the cylinder when the heating media are
 being sent through the lower end.
2. Under influence of the gravity,wet materials flow downwards to the lower end and contact the heating media directly or indirectly.
3. There is a stirring plate on the inner wall of the cylinder toÂ
stir materials continuously and make them have a full contact with air stream.Â
slag dryer structure
1.slag dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.
2.slag dryer is mainly composed of shell, back and forth supporting wheel, feedingÂ
and discharging unit and gear cap.
3. The accessories which are not in the scope of this machine include firebox,
 feeding and discharging equipment, dust catcher, etc.
Main technical parameters of slag dryer machine:
 Â
Model
Diameter
(m)Length
(m)speed
(r/min)Installation obliquity
(%) Drying temperature
(°c)Capacity
(t/h)Motor
(kw)Weight
(ton)
Â
Φ0.8x8
0.8
 8
3-6
3-5%
≥800
0.6-0.8
3
3.5
Φ1.0x10
1.0
 10
3-6
3-5%
≥800
1-1.5
4
7
Φ1.0x12
1.0
 12
3-6
3-5%
≥800
1.5-1.8
4
8
Φ1.0x15
1.0
 15
3-6
3-5%
≥800
1.5-2
5.5
10
Φ1.2x10
1.2
 10
3-6
3-5%
≥800
1.8-2
7.5
14
Φ1.2x12
1.2
 12
3-6
3-5%
≥800
2-3
11
15
Φ1.2x15
1.2
 15
3-6
3-5%
≥800
2.5-3
11
18
Φ1.5x15
1.5
 15
3-6
3-5%
≥800
3-3.5
15
20
Φ1.5x18
1.5
 18
3-6
3-5%
≥800
3.5-4
15
23.5
Φ1.5x20
1.5
 20
3-6
3-5%
≥800
4.0-4.5
15
25
Φ1.8x15
1.8
 15
3-6
3-5%
≥800
4.5-5.0
18,5
28
Φ1.8x18
1.8
 18
3-6
3-5%
≥800
5.0-5.5
18.5
30
Φ1.8x20
1.8
 20
3-6
3-5%
≥800
5.5
18.5
33
Φ2.0x15
2.0
 15
3-6
3-5%
≥800
5.5-6
18.5
35
Φ2.0x18
2.0
 18
3-6
3-5%
≥800
6-6.5
18.5
42
Φ2.0x20
2.0
 20
3-6
3-5%
≥800
6.5-6.8
18.5
50
Φ2.2x20
2.2
 20
3-6
3-5%
≥800
6.5-7.0
22
56
Φ2.2x22
2.2
 22
3-6
3-5%
≥800
7.0-7.5
22
58
Φ2.4x20
2.4
 20
3-6
3-5%
≥800
7.5-8
30
60
Φ2.5x20
2.5
 20
3-5
3-5%
≥800
8-9
30
63
Φ2.5x25
2.5
 25
3-5
3-5%
≥800
10-11
37
68
Φ2.6x20
2.6
 20
3-5
3-5%
≥800
9-10
37
65
Φ2.6x25
2.6
 25
3-5
3-5%
≥800
11-12
37
73
Φ2.6x30
2.6
 30
3-5
3-5%
≥800
15-18
45
80
Φ2.8x20
2.8
 20
3-5
3-5%
≥800
13-15
45
75
Φ2.8x22
2.8
 22
3-5
3-5%
≥800
15-16
45
78
Φ2.8x30
2.8
 30
3-5
3-5%
≥800
18-20
55
83
Φ3.0x20
3.0
 20
3-5
3-5%
≥800
18-20
55
78
Φ3.0x22
3.0
 22
3-5
3-5%
≥800
20-25
55
80
Φ3.0x30
3.0
 30
3-5
3-5%
≥800
25-28
75
90