General Inclined Belt Conveyor/Bucket Elevator with Rubber Belt
Viscosity Tester,Viscosity Meter,Digital Viscometer Cold Chain System Co., Ltd. , http://www.biosafetylaboratory.com
High quality vertical belt type bucket elevator/conveyor/lifting machine is designed for transporting vertically for granular, powder and small block of grinding suction smaller disperses the shape material, such as food, coal, cement, ore, etc.The hoisting height highest 40 MB, Material temperature doesn't exceed 60°C..TD type according to JB3926-85 "vertical bucket standard of design and manufacture, the current domestic common bucket is vertical, a novel.TD type bucket with four hopper Q type (shallow type), H (arc), and the measures of type (lh-zd type (SD) fights deep type).
High quality vertical belt type bucket elevator/conveyor/lifting machine is a kind of vertical conveying machine which is specially for conveying grain, feed, seed,flour and starch, etc.TD bucket elevator has such kind of advantages:Small occupation area, Large capacity, lower power consumption.The series bucket elevator is developped by introducing the advanced technology of the same type at home and abroad, which is widely used for conveying all kind of granule material vertically.
Application:
High quality vertical belt type bucket elevator/conveyor/lifting machine is used for transferring the materials in form of powder, granular, small block non-abrasive, half-abrasive with bulk density less than 1.5t/m3, such as coal, cement, gravel, sand, fertilizer and grain etc.
Performance and Features:
1.Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement.There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.
2.Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials.Sound seal and little circumstance pollution.
3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours.Stable running make it reach higher lifting height.
4.The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials.There is little materials sprinking during feeding and discharging to reduce machinery abrasion.
5.Wide application bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.
Working Principle:
While it is energized, the driving device drives pulley to make the bucket belt doing the circular motion from bottom to up.
The bucket is filled with material and is conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the Parabolic design.After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted up to do parabolic motion such repeated cycle.The material is lifted from bottom to the top to the specified height to reach conveying vertically.
Technical performance and parameters
Model
TD160
TD250
TD315
TD400
Bucket type
Q
H
Zd
Sd
Q
H
Zd
Sd
Q
H
Zd
Sd
Q
H
Zd
Sd
Capacity (m3/h)
9
16
16
27
20
36
38
59
28
50
42
67
40
76
68
110
Bucket width(mm)
160
250
315
400
Bucket volume(L)
0.5
0.9
4.2
1.9
1.3
2.2
3
4.6
2
3.6
3.8
5.8
3.1
5.6
5.9
9.4
Belt Width (mm)
200
300
400
500
Model
TD500
TD630
Bucket type
Q
H
Zd
Sd
Q
H
Zd
Sd
Capacity (m3/h)
63
116
96
154
_
142
148
238
Bucket width(mm)
500
Bucket volume(L)
4.84
9
9.3
14.9
_
14
14.6
23.5
Belt Width (mm)
600
700
Description
High quality vertical belt type bucket elevator/conveyor/lifting machine is designed for transporting vertically for granular, powder and small block of grinding suction smaller disperses the shape material, such as food, coal, cement, ore, etc.The hoisting height highest 40 MB, Material temperature doesn't exceed 60°C..TD type according to JB3926-85 "vertical bucket standard of design and manufacture, the current domestic common bucket is vertical, a novel.TD type bucket with four hopper Q type (shallow type), H (arc), and the measures of type (lh-zd type (SD) fights deep type).
High quality vertical belt type bucket elevator/conveyor/lifting machine is a kind of vertical conveying machine which is specially for conveying grain, feed, seed,flour and starch, etc.TD bucket elevator has such kind of advantages:Small occupation area, Large capacity, lower power consumption.The series bucket elevator is developped by introducing the advanced technology of the same type at home and abroad, which is widely used for conveying all kind of granule material vertically.
Application:
High quality vertical belt type bucket elevator/conveyor/lifting machine is used for transferring the materials in form of powder, granular, small block non-abrasive, half-abrasive with bulk density less than 1.5t/m3, such as coal, cement, gravel, sand, fertilizer and grain etc.
Performance and Features:
1.Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement.There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.
2.Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials.Sound seal and little circumstance pollution.
3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours.Stable running make it reach higher lifting height.
4.The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials.There is little materials sprinking during feeding and discharging to reduce machinery abrasion.
5.Wide application bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.
Working Principle:
While it is energized, the driving device drives pulley to make the bucket belt doing the circular motion from bottom to up.
The bucket is filled with material and is conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the Parabolic design.After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted up to do parabolic motion such repeated cycle.The material is lifted from bottom to the top to the specified height to reach conveying vertically.
Technical performance and parameters
Model
TD160
TD250
TD315
TD400
Bucket type
Q
H
Zd
Sd
Q
H
Zd
Sd
Q
H
Zd
Sd
Q
H
Zd
Sd
Capacity (m3/h)
9
16
16
27
20
36
38
59
28
50
42
67
40
76
68
110
Bucket width(mm)
160
250
315
400
Bucket volume(L)
0.5
0.9
4.2
1.9
1.3
2.2
3
4.6
2
3.6
3.8
5.8
3.1
5.6
5.9
9.4
Belt Width (mm)
200
300
400
500
Model
TD500
TD630
Bucket type
Q
H
Zd
Sd
Q
H
Zd
Sd
Capacity (m3/h)
63
116
96
154
_
142
148
238
Bucket width(mm)
500
Bucket volume(L)
4.84
9
9.3
14.9
_
14
14.6
23.5
Belt Width (mm)
600
700