Salt mist tester heating failure causes and solutions
Timeplex Industrial Limited has many experienced technical and management experts inthermal conduction industry. From products R&D , mold design, and mold fabricationto the product production( cold forging , CNC, CNC working center , cutting ,cross cutting , punching , multi-spindle drilling, multiple spindle tapping,chamfer , stripe drawing , polishing , alkali wash , stramline drying , rivetpin , silk-screen , packaging), and the surface treatment(electroplating ,anodizing , passivation , powder coating , Electrophoresis )and transportationone-step full range of processing services
Product description:
Audio Heatsink-A,Aluminum Heat Sink,Custom Copper Heat Sink,Oem Service Audio Heatsink Timeplex Industrial Limited , https://www.timeplexhks.com
One, can not be heated:
1. The solid state relay has no output. Replace the solid state relay 2. The meter has no output. Replace the meter 3. The heater tube is damaged. Check the resistance of the heater tube. If it is abnormal, replace it. 4. The water shortage causes the heat shield to check whether the water level is normal. There is no error 5, over-temperature protection malfunction, adjust the protection temperature, if still can not be solved, replace the over-temperature protection Second, the heating temperature is not normal:
1, the test chamber temperature controller temperature, set too low, the temperature controller is set to the desired temperature 2, the test chamber safety switch is set too low, the safety switch is set to the required temperature 3, saturated barrel Temperature controller temperature is too low, set the temperature controller to the required temperature 4, saturated bucket safety switch is set too low, the safety switch is set to the desired temperature Third, the instrument no display:
1. Whether the device has power supply, no power supply, please ask a professional electrician to check if the power switch is damaged. If it is damaged, replace the power switch. 3. Is the power circuit breaker damaged? If it is damaged, replace the circuit breaker. Power supply, power supply indicates that the instrument is damaged, need to replace the meter 5, check the device power supply terminals have black traces, if there is a black note that the instrument may burn, it is necessary to replace the meter above is the salt spray tester heating failure And solutions, if you have other doubts about the above issues, or would like to know more about salt spray testing machine information, welcome to inquire, we will serve you at the first time.
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)
The material used partly determines the extent of thermal conductivity. Copper and aluminum are the most widely used materials, though aluminum is the more common choice because copper is more expensive and heavier. Aluminum 6061 and 6063 are widely used with a thermal resistance of 166 and 201 W / mK, respectively.