What is the reason for the rise of oil level in the automatic generator set?
We have adjusted the Gluing process, and adopted the form of reverse wrapping roller and corrugated tip grouting, which can solve the problem that paperboard is easy to appear in the process of making low gram heavy paper.
A new set of sizing mechanism is developed to fix the position of the reducing roller relative to the scraper in the working state. Glue Applying Machine,Glue Application Machine,Auto Glue Applying Machine,Corrugated Line Glue Machine LLY PACK(foshan) Co.,Ltd. , https://www.llypack.com
First remove the oil gauge to check if the engine oil is too thin. If the oil level of the engine oil is found to be high and it is lean, the cause should be further investigated to see if there is water or fuel leaking and dilute the engine oil, causing excessive dilution. The inspection method is as follows.
Pull out the oil ruler, drop a few drops of oil on the paper to observe the color of the oil and smell the odor, such as the oil is yellow-cream, and no other odor, indicating that the water has entered the crankcase, you should check whether the cylinder gasket is damaged, whether the cylinder water channel Cracked, wet rubber sleeves and cylinder seals are installed correctly or damaged.
If you smell the fuel oil in the automatic generator set engine, you should start the engine to observe whether it is running well. If the exhaust pipe is black smoke after starting the diesel engine, you should check whether the needle valve of the injector is normally closed. If there is any leakage, it should be For maintenance. If the engine is underpowered at normal operating temperature, check whether the plunger of the injection pump is leaking diesel (for gasoline engine, check if the pump pump skin is broken), and the clearance between piston, piston ring and cylinder. Is it too large and replace or overhaul it?
The pressure of scraper on reducing roller does not change with the change of pulp thickness.
The slurry roller and the reducing roller can be repaired many times before use (the original model can only be repaired 1-2 times).