Several kinds of connection methods of rotameter
Tail Lights For Bmw F30/F80,F30 Gts Tail Lights,Bmw F30 Tail Lights,F30 Tail Lights Wenzhou Yecheng Auto Parts Co., Ltd. , https://www.hcmotionz.com
First, the flange connection: This connection method is the most used, a lot of glass rotor flow meter, metal tube rotor flow meter, electromagnetic flow meter, etc. have this connection, as long as the two ends of the flange and pipe Flange bolted on it.
Second, the thread connection: There are also some flow meter selection is a threaded connection, usually in the medical and food profession will use this connection method.
Third, clip connection: This connection method is comparatively advanced, some of the flowmeters that do not have their own flanges are selected for this connection, can be clamped between the two sides of the pipe base with bolts, this connection method is relatively simple. Many vortex flowmeters use this type of connection.
Clean clamp connection: Nowadays, this type of connection is used for some small-diameter, low-pressure pipelines. After this connection, the flowmeter can be quickly installed and disassembled, and its daily cleaning and maintenance are also very convenient. . Uniformly rich liquid-solid two-phase suspended liquids, such as mud, pulp, pulp and so on.