Sensorless single chip driver for stepper motors
Wood pellet complete production line is euipment for making the wood log/wood chips/sawdust/wood shaving/rice husk/stalk/grass...raw material into fuel pellets, Main process: Wood Chipper --hammer mill--biomass dryer--Biomass Pellet Machine--pellet cooler--Pellet Packing Machine.
Wood chipper: make the wood log/wood branches/wood blocks/bamboo... into smaller chips. Finished products: 20-50cm.
Hammer Mill/Crusher: crush the wood chips/wood shaving/small blocks/grass/stalk...to 6-8mm powder. Finished products: 6-8mm.
Rotary Dryer: dry raw material into suitable moisture to produce high-level pellets. Finished moisture: 10-15%
Cooling Machine: cool high-temperature pellets before packing.
Packing Machine: pack pellets into 20-50kg/bag or 1 ton bag. Advantage: easily to be transported to final users' site.
Wood Pellet Production Line,Wood Pellet Mill Machine,Wood Pellet Line,Biomass Pellet Line Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachine.com
These two products enable engineers to eliminate the need for switches, Hall sensors, flyback diodes, and many passive components in a variety of applications, ranging from automotive headlamp positioning systems and surveillance cameras to automatic "pick and place" systems. Vending machines, textile machinery, stage lighting and many other products.
The new device has an SPI interface that fully controls the NXT "next" input pulse conversion to provide the appropriate PWM output for the motor coil. This new device is designed as a co-chip for use with the main microcontroller or DSP. In addition, the AMIS-30522 includes a 50mA regulator and a watchdog for an external microcontroller. Both devices offer full-step to 1/32 microstep capability, including compensated and uncompensated half-stepping. Built-in current sensing eliminates the need for external current sense resistors, further reducing component count.
Each new mixed-signal IC contains two built-in H-bridges that can drive two-phase stepper motors with currents up to 1600mA. The speed and load angle outputs allow the main microcontroller to detect the stall rotor and end of operation without the need for additional switches, Hall sensors or optical encoders. In addition to stall detection, these features allow the designer to program the microcontroller to calculate rotor position and dynamically adjust current or speed as required to prevent out-of-step. This eliminates the noise and vibration of the end stop and improves the accuracy and reliability of the motion control without the need to add components.
At the same time, an option for this new device is to use an NQFP package with an exposed pad that has a cross-section of less than 1mm and a footprint of only 7mm x 7mm. In addition to their small size, these devices offer a range of additional features, including overcurrent, undervoltage and overvoltage, coil open or short, and thermal and diagnostics. In addition to saving board space, the small size of the components allows for direct mounting on stepper motors, further saving space and reducing circuit complexity. In addition, the improved SOIC's exposed under pad design greatly enhances thermal resistance and ensures efficient heat dissipation from the IC to the PCB.
AMIS is a company specializing in the production of digital ASIC products and mixed-signal ASIC products. At present, there are about 2,000 employees in the company headquarters and branches around the world. AMI's main products are: excitation sensor interface; telecom product timing generator; wireless baseband products; mixed signal ASIC; digital ASIC and other standard products.
Wood Pellet Machine: press crushed and dry sawdust/rice husk/straw/grass... into pellets. Finished pellets: 6/8/10mm.(Asian Market standard: 8mm; European Market standard: 6mm)
Reason: the finished pellets are very hot and realease moisture as they leave the pellet machine. This section can ensure to generate smooth pellets.