Power Tiller Gt-8A
Spandex
Warping Machine
Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.
A-ZEN spandex warping machine AZE318 with
vertical creel is driven by 5 sets high performance servo motors and adopted
with advanced precisive laser to measure distance so that spandex warping is
more stable, well equipped with and easier to operate. It is suitable for
warping all kinds of spandex, especially for requirement of knitting high
quality elastic textiles.
Technical Data:
Warp Line Speed: 100-600m/min;
Beam Size: Φ21"*21";
Warping
ends: According to customers` demand;
Pre-drafting:
0-200%; Final Draft: 15-100%;
Brake
time less than 0.6 s, the deviation of stop synchronization is less than 3%;
Creel
Capacity: 616, 700, 728, 784, 792, 896, etc.
Servo
Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft
Roller 4.6KW, Creel: 2*6.9KW;
Main
Motor: 10KW AC frequency conversion control;
Control
Mode: Computerized real-time control, and user-friendly operation interface.
Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.barmachinery.com
Main Applications of Power tiller
I. Revolving Farming
Mount the revolving farming device onto the left and right of the transmission shaft of the running part of the power tiller, then use two M8*55 screw bolts for axial positioning purpose, finally the machine can start revolving farming.
II. Ditching &Ridging
Unlade the velocity adjustment screw before the ditcher is mounted. Subject to the adjustment of the width and height for ditcher, then the ditching can be conducted.
III. Short Distance Transport
After mounting the forearm of the wagon box on the trailer and wheels one the transmission shaft of the running part, the machine can do a transportation job. The rated load is 250kg, under normal rotated speed of the diesel engine, speed of the fast shift is about 10km/h and that of the slow shift is about 5km/h.
IV. Multi-Functional Working
Dismount protection cover of the gear-box, unscrew the bolts away from the rear part of the main shaft, take the cover for keys out of the shaft, fasten the self-contained belt pulley or coupling onto the gear-box's main shaft's rear part with screws. Type A of common V belt is adopted for belt pulley's cross section. Rated rpm of the belt pulley is 3000 rpm. When the corresponding devices are equipped pumping water, spraying, threshing, reaping, generating electricity, etc are realized. (Above additional implements are in exploitation process. Please contact with the local distributor if you need above implements. )