How to handle the rust of the gate?
Frp Pultrusion Equipment,Frp Pultrusion Machine,Frp Equipment,Frp Pipe Making Machine HEBEI DONGDING CHEMICAL TRADE CO.,LTD , https://www.chopctfrp.com
The rusting treatment methods of the gates are listed as follows:
1. Application in the factory
Treatment: Usually use a sponge or cloth, add a neutral detergent or soapy water to wipe, you can easily rust, and then scrub with water once. It should be noted that the washing liquid should not be left on top. As long as the corresponding cleaning work is done in time, it is easy to maintain, the effect is obvious, and the cleaning cost is also small.
2. Application in coastal areas
Treatment: The same sponge or cloth plus neutral detergent or soapy water to scrub, so you can easily rust, and finally scrub with water. Note that you should pay attention not to leave the cleaning solution on the intelligent access control device. In fact, the effect is equally obvious and easy to operate.
3. Rusting caused by hand scale or fingerprint
Treatment method: As long as it is wiped with a neutral detergent, but it is not cleaned, it can be wiped with a sponge, cloth, etc. with organic solvents (alcohol, light oil, acetone, etc.), easy to operate, you can go rust.