The correct use of large tank trucks
In recent years, the occurrence of traffic accidents on large-scale tanker trucks has been on the rise, most of which are caused by improper operation and inappropriate methods of use. How can we prevent some traffic accidents from happening? In the use of the process and need to pay attention to what details? First of all, each large tanker truck must have a special fire extinguisher, and there are also rods that touch the subway chain and avoid electricity. In the process of driving a large tanker, touch the subway chain should touch the inside. When the tanker is refueling or when it is draining, it is necessary to insert the plug into the more humid ground. When the oil valve is released, the drain pipe must not leak, the outlet of the oil tank is unimpeded, and there is a habit of frequently cleaning the filter of the oil pump, and no dirt can enter the delivery hose. Neither the carburetor of an internal combustion engine nor the exhaust pipe of a large-scale tanker can be tempered. It is recommended to install the exhaust pipe directly in front of the car. Friends of the tank truck must be careful not to wear shoes with iron nails, nor can they smoke near the tanker. When stopping the enlarged tanker, pay attention not to park near the fire source. Just as the summer temperatures are high, the tanker is finally placed in a relatively cool place. It is advisable to have a place where special care and safety measures are available. All the lighting equipment in the car must be very good, the lamps and lanterns are below 36 watts to avoid sparks and accidents. When the sediment in the tanker is frozen, avoid using fire and you can push it to the thawing way of heating house, hot water, steam and so on. In the routine maintenance of the bottom of the vehicle, the gas turbine must be stopped, and the wheel must be fastened with a hand-held robot. Every time a large tanker truck is inspected and repaired, it needs to be tested. It must be driven by skilled personnel. There must be no people and objects in the vehicle. If it is necessary to test the road on the road, it must be accompanied by trials issued by various traffic departments. Trial photo taking.
The main feature of CNC cutting machine CNC cutting machine is that it can be processed according to the drawings. It can replace the previous cumbersome and inefficient manual calculation with computer programming, and can accurately cut out various complicated shapes of plates.
Performance advantages of this model:
Steel Cutting Machine,Thin Sheet Cutting Machine,Alloy Steel Cutting Machine,Thin Plate Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com
CNC cutting machines have been widely used in: agricultural machinery, machinery manufacturing, boiler manufacturing, pressure vessels, wind turbine manufacturing, power equipment, engineering machinery, transportation equipment, chemical machinery, environmental protection equipment, vehicle manufacturing, shipbuilding, coal mining equipment, tower cranes Heavy, bridge construction, building steel structure, steel formwork, road and bridge machinery...
This model is mainly used for precision cutting of large format sheets. It is an energy-efficient cutting and unloading equipment that can greatly improve the utilization rate and cutting efficiency of the steel plate. This machine can work continuously without downtime for a long time.
This model is suitable for medium and high-end users with strength.
