How to compress the garbage truck
Compression Garbage Truck Hydraulic Lift Safety Circuit In the hydraulic system of the lift filler, an explosion-proof valve is provided. The valve blocks the direct connection between the lift cylinder and the hydraulic hose. Even if the tubing bursts, the filler will not drop suddenly. Cause accidents and improve the safety of use. Compression garbage truck automatic and manual operating system agencies have two automatic and manual operations, such as automatic operation failure, manual operation can be used to complete the organization operations and unloading garbage, both to ensure the efficient operation of garbage trucks, and It provides great convenience for debugging, maintenance and troubleshooting. XCMG Chu Sheng compressed garbage truck refit part and the original car chassis is separable, easy maintenance and maintain the original car's mobility and driving performance. If there are special requirements for the garbage truck customers can call our company, we can design, modify according to user requirements. And can install direction assistance, air conditioning and so on. Convenient operation control The operation control box is installed in the cab and rear respectively. The operation control box in the cab can control the pushing and unloading and select the operation mode (such as automatic or manual). The rear operation control box controls the press-filling mechanism. With the operation of the barrel turning mechanism, the operation is very convenient. Especially in landfills, operators can complete discharging and sewage discharge without getting off the train. According to the user's requirements, it can be equipped with remote control device. Welcome to the sewage tank of the Xigong Chusheng Sanitation Truck Network. The water intake can accept the sewage leaked during the use process due to the aging or damage of the seal between the waste container and the filler. The cylinder is installed on the recovery tank. Or manually controlled drain valve to facilitate the discharge of sewage at the designated place. The filler cap completely covers the filling inlet of the filler and eliminates the phenomenon that the disturbance of the rear-end airflow causes the flying of dust and dust, and is more beautiful at the same time. Gravitational Gold Concentrator
It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Gravitational Gold Concentrator,Gold Extraction,Gold Recovery Equipment,Gold Washing Equipment Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com