HC Consortium Fire News announced on September 1, 2014 that the revised "Detailed Implementation Regulations for Compulsory Certification of Fire Products" was implemented. The "Detailed Rules" clearly states that fire alarm products , fire protection products, fire-fighting equipment products, and fire-fighting equipment products must be mandatory. After the certification, the new version of the “Detailed Rules” was introduced, to a certain extent, to eliminate the phenomenon of unlicensed operation, unlicensed sales, etc., from the source of control of product quality, can be said to inject a shot of “strengthening” for product quality.

The stand-alone photo-inductor smoke fire detection alarm includes a sensor component for detecting smoke particles, a circuit board for signal processing, a buzzer for providing sound indication, an indicator lamp for providing light indication, and a battery device for supplying power. Its working principle is as follows: The stand-alone photo-electricity smoke fire detection alarm has a built-in photoelectric labyrinth that avoids ambient light interference as a smoke particle detection chamber, which contains an infrared light-emitting diode (IRLED) as a light-emitting element and a photodiode as a light-receiving element. The element and the light-receiving element are arranged in the same plane at acute angles or obtuse angles, and the light-receiving element cannot normally receive light from the light-emitting element. Infrared LEDs work intermittently, working hundreds of microseconds every few seconds to save battery power. In the absence of a fire, even if the infrared LED emits a pulsed beam, the photodiode receiving the light does not generate photocurrent because it does not receive the emitted light, and the detection circuit has no output signal. In the event of a fire, smoke particles enter the photoelectric labyrinth. Since the smoke particles scatter the light emitted by the infrared LED, some of the scattered light is received by the photodiode, and the photodiode generates a weak photocurrent. After being processed by the conversion and amplification circuit, it is sent to The MCU or dedicated chip performs analysis. When the smoke concentration reaches the set alarm threshold, an alarm sound and light indication are issued to remind people to quickly escape or extinguish fire.

According to relevant data, 62% of home fire deaths are due to the fact that no stand-alone smoke detection alarms or fire detection alarms have not been installed; households that have installed smoke detection alarms have been involved in the fire. At that time, the chance of escape was 63% higher than that of households that had not been installed or installed without effective work. Especially when the fire was small, the timely alarm of independent smoke detection alarms increased the chance of self-extinguishing and evacuation. The mortality rate was only 1 %. The main reason for installing a stand-alone smoke detection alarm but not working effectively is due to an unmounted battery or battery failure. The promotion and proper use of stand-alone photo-inductive smoke detectors are beneficial to save lives and reduce property losses. At present, 22 companies have already passed the certification of independent optical smoke detectors.

22 companies have independently certified photoelectric smoke detectors

Zhenyi love fire electronic limited liability company

Beida Jade Bird Universal Fire Protection Equipment Co., Ltd.

Beijing Faantong Electronic Technology Co., Ltd.

Beijing Lida Hengxin Technology Development Co., Ltd.

Chengdu Anjisi Intelligent Equipment Co., Ltd.

Guangzhou Baodewei Electronic Technology Co., Ltd.

Gulf Security Technology Co., Ltd.

Hangzhou Weilong Fire Safety Equipment Co., Ltd.

Kunshan Detective Security Products Co., Ltd.

Ningbo Weizimart Electronics Co., Ltd.

Shanghai can the United States and West Comb fire equipment Co., Ltd.

Shanghai Songjiang Feifan Electronics Co., Ltd.

Shenzhen Orina Photonic Technology Co., Ltd.

Shenzhen Panhai Sanjiang Electronics Co., Ltd.

Shenzhen Fuan Safety System Co., Ltd.

Shenzhen Taihe An Technology Co., Ltd.

Shenzhen Xikam Isotope Co., Ltd.

Trane Fire System Co., Ltd.

Wuxi Blue Sky Electronics Co., Ltd.

Xi'an Shengsaier Electronics Co., Ltd.

Yingkou Tiancheng Fire Equipment Co., Ltd.

Yingkou Xinshan Eagle Alarm Equipment Co., Ltd.

Mattress Conveyor

Mattress Quality Control Conveyor ( Lifting & Flipping)

Motorized Rolling Conveyor
SL-MRC is an auxiliary equipment of mattress production line. Adopting
motorized rollers, with steady carrying and high efficiency.
Technical Specification:
Model SL-MRC
Standard size 2.5m / 6m (Will be made by order)
Carrying direction Straight direction
Carrying speed 12 m/min (Will be made by order)
Carrying capacity 200 kgs
Total power 750 W
Overall dimension 6000(L)x2110(W)x760(H) mm
Weight 930 kgs

CNC Glue Machine
This machine is mainly used for gluing the inner (or layers) of the mattress for
lamination. The sprayers movement from side to side, and the belt of working table`s
moving forward and backward are drived by servo motor, and controlled digitally. It
has the advantage of flexible and various spray route, accurate spray position and
high efficiency.
Technical specification:
Model SL-13SG-2H SL-13SG-2W
Numbers of sprayer 2 units 2 units
Glue type Hot melt Glue Water solution glue
Total power 7KW 3KW
Max width of mattress 2000mm (Automatic regulation)
Max height of mattress 400mm (Automatic regulation)
Max speed 20m/min (Automatic regulation)
Overall dimension 4500mm(L) x 2600mm(W) x 1600mm(H)

Mattress Conveyor,Mattress Turnover Conveyor,Mattress Upturned Conveyor,Automatic Mattress Conveyor

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com