Shijiazhuang Gongda drying equipment leading domestic
Sand 3D Printer,High-Performance Sand 3D Printing,Sand 3D Printing System,Sand 3D Printing Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzlprinter.com
China is a major producer of mineral and inorganic salt processing equipment in the world. However, the drying of ore powder and inorganic salts, especially the drying of barium sulfate, uses rotary kiln dryer systems for drying. The energy consumption of air blowing and induced air systems Larger. The traditional drying system uses coal-fired flue gas as a heat source, which increases the cost of burning coal and the cost of post-processing of flue gas. The equipment investment and operating costs are high, and the environmental pollution is large. In recent years, with the advancement of technology, some companies have used two-stage paddles and rotary flash dryers to dry barium sulfate. However, there are still problems such as large power consumption and insufficient heat efficiency.
The double paddle-disc type combined drying device improves the single drying ability based on the advantages of the traditional disc type continuous drier. The energy consumption cost for drying the same quality material is 1/3 of the energy consumption cost for using other air flow drying. 1/5. Due to the closed operation, the gas consumption is small and the dust is low. Therefore, the dry powdery material does not diffuse in the air, thereby eliminating the dust pollution to the environment and on-site personnel, and making the working environment and exhaust gas of the drying device meet the environmental protection requirements.
With the development of China's economy, the demand for drying equipment is also increasing. The development of drying equipment in China will certainly bring new opportunities for the development of the domestic chemical, food, wood and many other industries.