Dangerous Goods Transporter

Dangerous goods transport vehicles (Dangerous goods transport vehicles) are special vehicles with non-closed tops of containers, fireproof devices installed in front of exhaust pipes, and dangerous goods such as petrochemicals, explosives, and firecrackers. The dangerous goods transporter is equipped with ABS system device to carry out full monitoring of the transportation process. Equipped with anti-collision bar, anti-static and other facilities are safe and reliable.

Road transport of dangerous goods must be equipped with transport equipment and handling equipment to ensure safety, and operational management personnel and drivers with professional dangerous cargo performance to ensure the safe transportation of dangerous goods.

The motor vehicle cargo box should be a wooden floor, so that sparks can be avoided; if the iron floor is used, corresponding liner protection should be used. Motor vehicle exhaust pipe must have heat insulation and spark extinguishing devices. According to the nature of the dangerous goods loaded, it is equipped with appropriate fire-fighting equipment and devices such as strapping, waterproofing, and anti-dissipation.

Tank (tank) car tank (tank) body material must be compatible with the nature of the loaded goods, such as: nitric acid application of aluminum tank, waste nitric acid application of glass steel and stainless steel. According to need, equipped with double-channel gates, anti-wave plate, sunshade and other safety devices. Vehicles that transport containers, large cylinders, and movable tanks (cans) must have effective, robust equipment and corresponding cork.

Special transport vehicles and equipment for transporting radioactive isotopes must comply with the relevant provisions of the department of hygiene and epidemic prevention. Vehicles, equipment, handling tools, and protective equipment should be subject to periodic inspection of radioactive contamination. When pollution intensity exceeds the standard, it must be cleaned and disinfected before it can continue to be used.

The various loading and unloading machinery used requires sufficient safety factors. The general design requirements exceed one-third of the load capacity. For cranes and trucks with a rated load of 5 tons, they should be able to reach a lifting capacity of 6 tons to 7 tons. Shipment machinery must have anti-explosion devices that eliminate sparks. It is forbidden to use friction-producing tools that generate sparks. The tools used must not have contaminants that are incompatible with the loaded goods.

1. The transport of bottled compressed gas and liquefied gas in vans must be equipped with ventilation and fixtures;

2. Transportation of flammable and explosive special vehicles shall be equipped with conductive static rubber towing devices in compliance with the regulations;

3. For transporting bottles of compressed gas and liquefied gas at horizontal levels, if the internal dimensions of the compartment width do not reach the length of the cylinder, replace the vehicle that meets the transportation requirements;

4. Transport oxidants and organic peroxides must use van type temperature control vehicles;

5. The name of the dangerous goods name system shall be applied to the business scope of the special tanker trucks for transporting dangerous goods;

6. If a tank-type vehicle with a service life of seven years or more (based on the date of registration of the vehicle permit) does not match the tank volume and filling medium with the quality of the approved load, it must exit the dangerous goods operation column.

Foreign accounts do not apply for the qualification certificate for dangerous goods. If it is a local account, it must be held above the relevant business qualification certificate for more than two years.

The formal driving school can also handle the hazardous product qualification certificate. When applying for the qualification certificate, you need to provide your own ID card and copy of the driver's license, 3 pieces of white background, 3 original photos of the practitioner's card (more than 2 years), and other relevant information.

The road transport of dangerous goods transport drivers qualification certificates and escort cards can be passed through the road dangerous goods transport company, or I personally go to Qiyun driving school registration. Two qualification certificates cannot be processed at the same time and they need to participate in relevant training.

After registration, after passing the qualification examination, it is necessary to participate in training related to not less than 30 school hours in the Automotive Driving School, and then to organize examinations by the municipal competent department of transportation. According to the provisions of the road transport of dangerous goods practitioners qualification examination organized once a quarter.

After passing the exam, you can get the card within 3 working days.