Basic knowledge of mineral floatability classification

In order to systematically master the flotation practice of various ores, according to the characteristics of the surface properties of various minerals in the flotation and the effects and practical experience of the flotation reagents, it is practical to classify the minerals according to the floatability. This classification was first proposed by the former Soviet Union, Angelis (M·A·eǔreviec), and is divided into six categories.
(1) non-polar non-metallic minerals. Mainly in this category are graphite , natural sulfur , coal and talc , which have good natural hydrophobicity and can be well floated with a non-polar oil collector or with only a foaming agent.
(2) Natural metals and heavy metal sulfide ore. These are natural Au, Ag, Pt, Cu, minerals and sulfide minerals such as Cu, Pb, Zn, Hg, Sb, Mo, Bi. This kind of mineral has certain hydrophobicity when the surface is not oxidized by the material. It can be effectively collected by thio compound collectors (mainly xanthate and black medicine). The flotation method is to treat such minerals. The main method.
(3) Non-ferrous metal oxide minerals. Lead carbonates and sulfates of copper zinc, and the corresponding salts of other mineral acids containing oxygen, such as white lead, lead alum, calamine, malachite, gypsum, color wulfenite like fall into this category. This type of mineral can be floated with xanthate collector after vulcanization. Flotation can also be carried out by directly using fatty acids and their soaps without vulcanization.
(4) Polar salt minerals. The crystal lattice contains alkaline earth metal cations - calcium, magnesium , strontium , barium. The ionicity of the bonds on the crystal lattice of such minerals is strong and can be reacted with the collector anions without the cations on the activator lattice. It is easy to float with fatty acids. Mineral fall into this category are: scheelite, molybdenum, tungsten calcium mineral, apatite, phosphorite, fluorite, barite, calcite, chalk, magnesite and dolomite.
(5) an oxide, silicate, and aluminum salts. There are many such minerals, some of which have industrial value, and most of the minerals are discarded as gangue minerals during flotation. Most minerals have sufficiently pronounced phytoplankability when fatty acid type collectors or cationic collectors are present. However, the floatability of many minerals in such minerals is related to the presence or absence of foreign cations on the mineral surface. Therefore, the floatability of minerals is closely related to the conditions for the formation of minerals and the treatment of pulp before flotation. Mineral fall into this category are: silica, alumina, boehmite, gibbsite, zircon, rutile, molybdenum China, hematite, magnetite, cassiterite, titanium, iron, manganese soft ore, kyanite , andalusite, feldspar, spodumene, a variety of mica, sericite, kaolin, tourmaline, asbestos, chromite, beryl and so on.
(6) Soluble salts of alkali metals and alkaline earth metals These minerals can be floated in a saturated solution with a fatty acid or a cationic collector. The minerals that can be floated in this type of mineral are: sodium salt, potassium salt , magnesium vanadium , anhydrous potassium salt potassium magnesium vanadium.
This chapter will focus on the flotation practice of some ore.

Automobile Plastic Parts

During this initial phase, Design Engineers, Tooling Engineers, Materials Engineers, Manufacturing Engineers, Quality Engineers, and Lab Technicians work together to determine product specifications, tooling component capabilities, tooling materials, operating limitations, and any required product enhancements and improvements. The team specifically looked for any potential issues with part geometry or tolerances that could result in poor steel condition or require special tool features such as lifters, slides and threading/unthreading. The physical and chemical properties of the selected resins are also evaluated in order to select suitable mold steels and review mold cooling. In addition to determining the proper vent location, a mold flow evaluation is performed to determine the optimal gate type and gate location.

The manufacturability review includes the validation of standard plastic design practices and the incorporation of tooling details to create the most robust design possible. Tool specifications and tool provenance are finalized and purchased component sources are qualified. A comprehensive Process Failure Mode Effects Analysis (PFMEA) was also completed.

337c89d2995e2c60fbbdadb453a729a Jpg

Automobile Plastic Parts,Plastic Injection Molded Automotive Parts,High Precision Abs Injection Plastic Molded Parts,Custom Injection Molded Plastic Abs Parts

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjinjectionmolding.com