Rubber Resilient Seated Gate Valve Pn16

Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.

1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
 
NO. PART MATERIAL
1 Body Ductile Iron
2 Seat EPDM
3 Shaft Stainless steel 420
4 Disc Ductile Iron
5 Wedge Nut Brass
6 Bonnet Ductile Iron
7 O ring EPDM
8 Thrust ring Brass
9 sealing ring EPDM
10 socket head screw Carbon Steel
11 O ring EPDM
12 Hand wheel Ductile Iron
13 Stem Nut Brass


Rubber Resilient Seated Gate Valve Pn16

  DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.

1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
 
NO. PART MATERIAL
1 Body Ductile Iron
2 Seat EPDM
3 Shaft Stainless steel 420
4 Disc Ductile Iron
5 Wedge Nut Brass
6 Bonnet Ductile Iron
7 O ring EPDM
8 Thrust ring Brass
9 sealing ring EPDM
10 socket head screw Carbon Steel
11 O ring EPDM
12 Hand wheel Ductile Iron
13 Stem Nut Brass


Rubber Resilient Seated Gate Valve Pn16

 

Polyether Polyols for Flexible Foams

The products are suitable for preparation of flexible polyurethane foam plastics, such as furniture mat, mattresses and sound-absorbing board, carpet bottom, filters, packaging materials, etc. When foams are produced,the amount of the additives is variable and adjustable in a wide range.They also have good stability during foaming.


Polyether Polyols For Flexible Foams,Polyol Ether,Polyether Polycarbonate Polyols,Polyoxypropylene Triol

NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.luckychemical.com