To ensure effective maintenance of the vehicle in the diagnostic system state
The requirements for the reliability of the vehicle equipment shall be determined according to the conditions for ensuring safety or the conditions for optimizing the cost of vehicle equipment manufacturing and operation. In the design of new passenger locomotives and vehicles for the “Mainline†Vehicle Manufacturing Design Bureau, the safety level of the vehicle equipment was required to ensure the safety level, especially the safety of the system that has an impact on the determination of the continuous operation non-failure rate index. Levels were assessed. Control systems and diagnostic systems become the first step in the automatic detection of data. They are used to provide continuous detection and assessment of the technical state of vehicle equipment, and are used to provide analysis and transmission related to fixed stations of technical maintenance from running trains. Device failure and damage information. It should be noted that the instrumentation method is the only method that can be used in certain situations, for example when tracking certain rapidly varying damage propensities, because the detection of this process may have to be performed continuously. In order to ensure the effective maintenance of the vehicle under the state of the diagnostic system, there must be a function that can automatically predict the failure of the bogie, the automatic coupler, and the brake device. In order to solve these problems, new diagnostic techniques should be studied and adopted. For example, to detect the status of brake shoes, many foreign companies have used video monitors to transmit information to electronic computers. The discovery and detection of crack propagation by fluoroscopy is a method of acoustic emission. This method is based on the principle of measuring sound radiation's oscillation at the crack, and has been successfully applied to many sectors of the machinery manufacturing industry. As pointed out above, not all vehicle equipment system damage can cause the entire vehicle to fail. Therefore, the choice of reliability level and maintenance method is applicable to the implementation of the total cost minimization result. See the procedure for selecting equipment management and maintenance methods. Bicycle Rear Shelf,bicycle rack,bike rack,cargo rack,cargo bike rack Suzhou Jingqiyao Intelligent Technology Co., Ltd. , https://www.jingqiyaoparts.com