·Industry and Information Department: Strengthening the traceability system for tank cars
In order to improve the quality and safety performance of tank transport vehicles, especially to strengthen the management of pressure tank vehicles and atmospheric dangerous goods tank vehicles, and reduce road traffic safety hazards, the Ministry of Industry and Information Technology issued an announcement at the end of July, for "special vehicles and trailers" The Regulations on the Administration of Production Enterprises and Products (referred to as the “Access Rulesâ€) was revised to increase the tank vehicles in the product varieties, and the “Management Requirements for Tank Vehicle Manufacturers and Product Access†(referred to as “Access†Management requirements"), the proposed tank vehicle manufacturing enterprises should comply with the "Access Rules" and "Access Management Requirements." 750Ml-750G Tequila Bottle,750Ml Liquor Bottles,Custom Tequila Liquor Bottles,Customized Tequila Liquor Bottle Shandong Tengrui Glass Products Co., Ltd. , https://www.ruitongglass.com
It is understood that in the "Admission Rules", on the basis of the "Special Vehicle and Trailer Variety Classification Table", the types of tank vehicles will be increased, and they will be further divided into: ordinary tank vehicles and pressure tanks according to the structure and use. Vehicles and atmospheric dangerous goods tank vehicles.
For tank-type vehicle manufacturers, manufacturers of complete vehicles, special-purpose vehicles and trailers that require tank-type vehicles should have the corresponding production capacity and conditions as stipulated in the Access Rules. Among them, pressure tank vehicles and atmospheric pressure dangerous goods tank vehicle manufacturers should also meet the tank design and manufacturing requirements; pressure tank vehicle manufacturers should have a pressure vessel manufacturing license, the tank should be self-made. Tank technology should be derived from enterprises or institutions with pressure vessel design licenses; atmospheric pressure dangerous goods tank vehicle manufacturers should have tank design capabilities and manufacturing capabilities, and obtain national products for hazardous chemical packaging and container products. Product Production License, the tank should be made.
For tank vehicle manufacturers, it is required to establish a product traceability system, focusing on the tank inspection report issued by the inspection agency recognized by the competent department, design, procurement, manufacturing, assembly, inspection, sales and after-sales service of tank and safety devices. process. A database corresponding to the vehicle identification number (VIN) should be established to quickly query the size and quality parameters of the vehicle's products, as well as the structural types of anti-lock brakes, brakes, auxiliary brakes, speed limiters, tires, and tachographs. And important parameters such as model and supplier. The "Entry Management Requirements" proposes that when inspecting a tank vehicle product, the inspection organization shall conduct inspections in accordance with the requirements of national standards and relevant regulations, and reflect the tank size and wall thickness, material, effective volume and calculation in the finalization report. process. For pressure tank vehicles and atmospheric pressure dangerous goods tank vehicles, the product name, product model, production enterprise and installation location of the safety device shall be reflected in the final report. The tank inspection issued by the inspection agency recognized by the competent department shall also be inspected. report. The Access Management Requirements clarify the focus of the review of tank vehicles. It is important to review the dimensions and quality parameters of tank vehicles, roll stability, and braking performance in accordance with national standards and relevant regulations. For pressure tank vehicles and atmospheric dangerous goods tank vehicles, it is also necessary to review the installation and performance of safety devices such as emergency shut-off valves and the structure of anti-lock brakes, brakes, auxiliary brakes, radial tires, and limits. Speedometers, signs, tachographs, exhaust pipes, etc. shall comply with the requirements of national standards and relevant regulations, and increase the contents of the canned vehicles. The "Entry Management Requirements" proposes that from July 1, 2015, the pressure-bearing tank vehicles and atmospheric pressure dangerous goods tank vehicle manufacturers that do not meet the above requirements will suspend their related products "Announcement" and suspend acceptance. Its related new product declaration.