Low Price Straight and Reverse Twisted Hexagonal Wire Netting Machine
Hydraulic Motor For Aviation Kerosene Hydraulic Motor For Aviation Kerosene,Hydraulic Motor For Aviation,High Rpm Hydraulic Motor,Hydraulic Motor Rpm Ningbo delambo hydraulic power Co.,LTD , https://www.sun-seiko-hyd.com
Illustration of working principle:
This machine adopts the principle of clockwise and counterclockwise twisting. Our factory produce the straight and reverse twisted hexagonal wire netting machine with the models such as 1/2'',5/8'',3/4'',1'',1-1/2'',2'' and so on. Based on the principle of clockwise and counterclockwise, there series of products are suitable to manufacture hexagonal wire netting whose cell size is compatible with the weaving machine.
Application: With a bright prospect, these products are widely used in fences of farmland and grazing land, reinforced ribs of building walls and other nets for separation.
Advantages: Based on the principle of clockwise and counterclockwise twisting, it is unnecessary to make the iron wire spring form for this machine to work consecutively so that the productivity increases a lot.
Characteristic:
1. It can reach 65 cells per minute as its maximum speed and adjust the speed depending on different raw materials in order to reduce breaking rate.
2. Wide breadth of net. NW can weave double 1.1 meters width, and can weave single 2.2 meters.
3. Tidy and consistent cell distribution. It is easy to take a thread anywhere.
4. Equipped with clutch brake and spot start. It is easy to operate and reliable. It needs fewer requirements for operators.
5. Reliable centralized lubrication. It is easy to use.
6. Solid and durable, Easy to maintain and adjust.
II.Theoretical parameter
Type
Mesh Width(mm)
Mesh Opening(mm)
Wire Diameter(mm)
Number of Twists
Weight(T)
Motor Capacity(kw)
SR
2000-2500
20-22
0.52-0.70
6
3.5-4.5
2.2
25-27
0.50-1.00
30-32
0.50-1.20
40-45
0.60-1.40
50-55
0.60-1.50
75-80
1.00-1.50
III.Picture 
IV.Commercial terms
1. FOB CFR CIF price all available          Â
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1 set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
V.Contact Information
Â