Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating

Model NO.: CARH-28
Max. Working Temp.: 800degree Celsius
Lead Length: Customized
Length Tolerance: Plus or Minus 0.02mm
Voltage: 220/380V
Pipe Diameter: Standard in 12mm. Customized
Heater Length: 20-2000mm. Customized
Features: Flexible Wiring
Trademark: Thermal International
Transport Package: Standard Export Packaging
Specification: Single-end
Origin: Guangzhou, China
HS Code: 8516800000
Product Description:


1. Introduction:

       The single head cartridge heater is also called the mold heater. Mold heater has the characteristics of simple forming device, small equipment investment, simple mould structure, etc. it is still one of the most popular means of production in today 's highly developed mechanized and automated production. However, there are many key techniques in die design for compression molding. The heating, heat preservation, cooling and clamping structure of the die is an indispensable part of the design of the composite die. Structural design directly affects the appearance and internal quality uniformity of the product, and also affects the forming efficiency of the product.




2. Product features:

       Steel heating is almost all plastic molding die design must adopt the heating means, can be designed for one-way wiring, two-way wiring and other forms, material can be used with seamed heating element, seamless heating element, stainless steel tube, etc., characterized by small heat loss, high thermal efficiency, simple wiring, can be designed as required for 220V or 380V. And the wiring is flexible.




3. Design guidelines for cartridge heater(mold heater):
  1. Whether the power setting is reasonable: Have you chosen a reasonable power load based on their own actual situation ((high power load requires the use of imported materials and imported technology), if the power load is too high, it will lead to electric heating element burning.
  2. The high watt density cartridge heater(mold heater) during use, due to its heating rapid cooling conditions are poor, often lead to external stainless steel heating element coking black, oxidation, deformation, resulting in internal heating element - electric heating alloy wire due to high temperature air-fired fuse, resulting in a short life of single head electric heating tube itself, therefore, good production of the mold heater not only need to produce good quality, more requires the material of the mold and processing aperture.
  3. Attention should be paid to the precision of the mold deep hole processing, two head drilling is unworkable, because the junction cannot be closed and there is a large pore, causing the heat dissipation is poor, the temperature of the object to be heated is uneven.
  4. Emphases should be put to the magnesium oxide powder at the outlet end of the electric heating element, which can not be penetrated by pollutants and water in the use place, so as to prevent leakage. it is best to reserve 5 mm outside the mold.
  5. It better to preheat 5 minutes before the heating element's first use, in case of any risk of leakage due to the air humidity or moisture. The use of electric heating machinery must be equipped with grounding line.
  6. The electric heating element should be fixed tightly so as to protect the heating area from air leakage and burning, avoid using heat transfer mud, so as to avoid carbon deposition and leakage in the inner hole, and it is not easy to replace the electric heating element in the future.




4. Technical parameters:
 
Item description Explosion-proof single head Cartridge Heater
Voltage 220/380V. Customized
Working temperature Maximum 800degrees
Pipe diameter Standard in 12mm. Customized
Leakage current no more than 0.5mA
Heater length 20-2000mm. Customized
Sheath material Incoloy800/840/Stainless steel 304/316/321 etc. 
Unheated zone 5-10mm in standard.
Applications Die mould heating





5. Product presentations:

Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating






6. Applications:

* plastic packaging
* small mould heating
* analysis instruments
* the industry
* semiconductor eelectric welding
* Water and Oil Heating Appliances. 






7. Related products:

Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating









8. Certificate:

Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating







9. Order instructions: 

Please kindly advise your specifications or drawings with following information when you inquiry:
1. Tube (Materials, diameter, length)
2. Wattage and voltage
3. Working environment and temperature
4. Type of terminal
5. Drawing of special type configuration
6. Special testing requirements before shipment
7. We like to get any feedback of finned heating elements from your side. 
We will try our best to do for you.




 

10. Delivery:

       For sample or trial order of small quantity, we shall advise the Express Delivery for the high-efficient shipment. And for bulk purchase, we generally apply to the sea transportation. Of course, that would depend on the customers' requirements. 

Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating





About Us:

Explosion-Proof Single Head Cartridge Heater Applied for Industrial Die Mould Heating


       Thermal International generally specializes in the production and sales of various types of electric heating element, including the domestic heating element as well as the industrial heating element. Insist on adopting high quality material at home and abroad, specializing in the production of copper, aluminum, titanium, stainless steel material such as electric heat pipe, heating bar, hot plate, industrial special black and white porcelain electric heat tube, quartz electric heat pipe, titanium products and industrial non-standard electric heat pipe, widely used in industry, food oven, household electrical appliances, and other machinery and electronic equipment. Product life long and stable quality.
       And of course, the OEM service is available. Can be customized according to customer demand of different specifications, material. There are advanced detection equipment, strict quality management system, the factory products are in line with JB4088-85 standard, already through the CQC authentication. Quantity is with preferential treatment.Please kindly inform us of the detailed specification/drawing of products that you want to buy.We promise to reply with the most suitable suggestions asap.




Why you choose us?

High-Quality Process: All the production are strictly complied with the relevant quality standard requirement, and the finished products can be delivered only after the successful internal inspection before the factory; 
Reasonable & Fair Price: The mode of small profits and quick turnover is the mode of sales we have always adhered to. 
Complete Range of Specifications: Accepting customized requirements, specifications and models are completely optional; 
Service Quality: With good pay, in return for sincere return, we provide comprehensive technical and after-sales service; 
Business Philosophy: Customers are our god, the quality of what god needs.




FAQ:
1. Are you a factory or a trading company?
A: We're an experienced factory with our exclussive Research & Development team. 
    Offering you the most professional service. 
2. Will you accept customized requirement?
A: Of course, customized service is surely acceptable. Welcome to send us your drawing and more detailed specification parameters. We can supply you the products as per your specific requirements. 
3. Could I get some sample?
A: Yes, generally, 1pc sample for free is available. But if you need more samples, we may need to charge you some cost. Besides, for certain products, it may need to open mold before sampling, then we shall need to have the mold fee before sample. 
4. What's the delivery time for sample?
A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.
5. What do you generally do in regarding to the products' quality control? 
A: We always put much emphasis on products quality. That's the priority. We shall contact strict quality inspection towards the products before delivery. And we've obtained the VDE, CE, UL, ISO and so forth. 
 

PP/PE/PVC wall corrugated pipe extrusion machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarsmachinery.com