No. 1 Document "Improved Development of Hand-picked Drying Industry

Lu Jiaxing, a farmer in Harbin, Heilongjiang Province, planted 400 mu of corn, which was just harvested and sold to a food broker.

“Because the water is very high, the sales price is very low.” Lu Jiaxing said that because the measured moisture reached 32%, the price of corn was only 0.73 yuan/kg.

Also in Heilongjiang Province, according to the data from relevant monitoring agencies, a food site in Mudanjiang City reflected that after the local drying, the purchase price of corn with moisture at 14% was 1.1 yuan/kg.

"If I'm not rushing to use the money, I will also dry my food and sell it," Lu Jiaxing said.

Insiders said that after the corn is dried, the selling price naturally rises. At the same time, the quality of grain after drying is guaranteed, and it also solves the problem of food security, killing two birds with one stone.

"First Document" mentions

Recently, the Central Committee of the CPC Central Committee and State Council promulgated the "Several Opinions on Intensifying Reform and Innovation to Accelerate the Modernization of Agriculture", that is, the 2015 Central Document No. 1 stated that it is necessary to strengthen agricultural socialization services.

“We will do a good job in piloting innovations in the socialized service system for agricultural production, and we will give priority to providing farmer households with services such as farming, collection and management, drying and storage,” said the Opinion.

According to the Report of the Grain and Oil Market News, the drying service was first mentioned in “No. 1 Document” and became a major advantage for the development of the domestic drying industry.

According to some media interpretations, as the 17th document since the reform and opening up and the 12th document guiding the “three rural issues” since the beginning of the new century, the development of the grain drying machinery has brought the spring breeze.

On February 4, the Ministry of Agriculture issued the "Opinions on Solidly Implementing Agricultural and Rural Economic Work in 2015," and it has repeatedly mentioned that the drying technology should be promoted.

The "Opinions" pointed out that in the major grain and staple agricultural production areas, the focus will be on the promotion of mechanized production technologies such as rice transplanting, corn harvesting, mechanized plant protection, post-harvest drying, and cotton oil and sugar.

The "Opinions" also said that the key support for professional operating service organizations for farmers to provide seedlings, farming, collection and management, unified defense rule, agricultural supplies, drying and storage, agricultural products processing, market information and marketing services.

In addition, the Ministry of Agriculture, while deploying key agricultural product processing industries in 2015, emphasized that farmers’ cooperatives, family farms, and professional large households should be encouraged to establish drying facilities through joint ventures and cooperation to prevent waste caused by excessive food processing; and vigorously promote grain processing technology. Innovate and popularize, improve grain drying and processing conditions; support farmers cooperatives to establish processing and circulation of agricultural products, encourage the construction of “food banks”, and explore business models of uniform drying, unified processing, unified storage, and unified sales after food production.

Drying speed

In the past two years, due to the country’s high priority on food security, the use of drying towers in major grain-producing areas has increased.

“The number of drying towers in the northeast region has increased significantly,” said a staff member of a large grain trading company in China. The feed processing industry, which is the most important producing area of ​​corn in Northeast China, is less developed; the corn production in the south is relatively low. Less, the feed processing industry is extremely developed. Under this background, the vast majority of corn produced in the northeast region must flow to the south. Feed companies generally need to purchase dry food, which has prompted a drastic increase in the number of drying equipment in the Northeast.

"After the grain is dried, not only can it guarantee quality, but it can also carry long-distance transportation without worrying about mildew," said the above-mentioned staff.

However, following a large-scale drying company's marketing personnel inspected the domestic grain production areas, although the country has provided corresponding subsidies for drying machinery, the drying equipment for hundreds of thousands of units has been dried due to different policies. The number of horses launched is obviously different.

An agricultural household in Jiangsu said in an interview that they have spent hundreds of thousands of dollars on the purchase of drying equipment. If they are in accordance with Zhejiang's policies, the subsidy cost can be as high as more than 100,000 yuan.

According to the person in charge of the Guwang Drying Machinery Co., Ltd., the introduction of a number of policies has painted a bright future for the development of the dryer industry.

Still need to work hard

In 2014, a certain rice mill in Yuechi, Sichuan Province started drying equipment. According to the person in charge of the rice plant, after investigating several brands, the company finally chose equipment manufactured by a Taiwan-owned company and Shanghai Sanjiu Machinery using Japanese technology.

“Their equipment is more expensive than other domestic brands, but the quality is better and it can be used for a long time.” The above-mentioned person in charge stated that although many domestic brands were also inspected, they were warned by many of their peers and the domestic brands were bake. Although dry equipment is inexpensive, it is generally of good quality and often involves a lot of mistakes.

The person in charge of a domestic drying equipment company also criticized that due to the low threshold, a large part of domestic small-scale drying equipment manufacturers survived. The quality of the equipment produced by these enterprises was extremely low, which greatly affected the domestic drying equipment. Brand.

The relevant staff of Guwang Drying Machinery Co., Ltd. stated that although the state has introduced many supporting policies, companies cannot rely on this as a basis. They are hard at work and continue to do a good job of the market so as not to destroy the current good situation.

"We have no problem with the current market, but our priority is to make better products that are suitable for the needs of the market. We believe that we must do a good job in product quality, sales channels, after-sales services, financial services, etc. We are in an invincible position." Said the above-mentioned staff.

Weld Materials

1.Welding materials

In Welding, substances called filler materials or consumables are used. As the name implies, these substances provide filler or a body of molten materials that provides a strong bond to be formed between the base metals used. Most welding processes will also require some form of shielding to protect both the main components and filler from being oxidized during the process.

The type of welding materials used during welding depends on the nature of the job intended. Electrodes draw the necessary energy in order to perform welding applications. Luoyang Golden Egret Company has any kind of welding materials include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod, Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.

Welding can be applied in different kinds of industries such as building and construction, oil and gas, marine, power generation, steel, mine tools, automobile, transportation and etc.

2. Welding rod

1)Cast tungsten carbide based tubular rod

The hard phase of the rod is cast tungsten carbide which leads to higher hardness and better wear-resistance.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65

Mainly used for Mining machinery, Geological tools, Petroleum drilling tools etc, by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT1103 (CTC, 60-80 mesh),

GT1103-1(CTC, 20-30 um),

GT1103-2(CTC, 40-60 um)

2)The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test.

Mainly used for mining machinery. Geological tools etc; by Oxy-acetylene with weak carburizing flame.

Product recommendation:

GT2102 (Cemented carbide grit, 30-60mesh)

GT2102-2(Cemented carbide grit, 30-40mesh)

GT2102-3(Cemented carbide grit, 40-60mesh)

3)Tube rod is composited by Cemented carbide pellets, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65.

Mainly used for oil method drill bits, such as Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT3302 (carbide pellets, 20-40mesh)

GT3302-1(carbide pellets, 14-40um)

4)The hard phase of the rod is monocrystal WC, the welding layer has a higher wear resistance and better impact resistance.

The wear resistance is 6-7 times better than others, tested by ASTM G65 method.

Mainly used for the repair and strength for oil drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT4104 (Monocrystal WC, 80-200mesh)

3. Welding Rope

Made form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The CTC is in spherical or irregular with good wear resistance; the nickel alloy is in spherical or nearly spherical shape with good wettability and erosion resistance and better corrosion resistance than tubular rod.

Recommend to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice, Coal drill pipe, Tunnel drilling machinery etc.

By Oxy-Acetylene Welding with weak carburizing flame.

Product recommendation:

GS110450N (CTC, 4mm, HRC 47-55)

GS110550N (CTC, 5mm, HRC 47-55)

GS110650N (CTC, 6mm, HRC 47-55)

4. Welding Bar

The rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is in irregular or spherical shape with better wear resistance and the nickel alloy is in spherical or nearly spherical shape and has good wettability with cast tungsten carbide. The cladding layer has a higher impact resistance and better wear resistance.

Its wear resistance and corrosion resistance is between tube rod and flexible rope.

Mainly used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner drill stem and Mechanical parts of Tunnel rock drill machine etc.

Welded by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GD4025253-3(CTC, SCTC, 4*600/6*600)

GD4030303-3(CTC, SCTC, 4*600/6*600)

5. Welding wire

Intensified molybdenum titanium vanadium composite chromium carbide welding wire can improve layer`s bonding strength and tenacity. This wire can use for multilayer welding which has no peel off, and it can maintain good wear resistance under certain impact working condition.

Product recommendation:GSQD671Mo-4(1.6mm)

Medium carbon and high chromium wear resistance welding wire has a higher hardness, stronger wear resistance, and excellent toughness by adding a certain amount of molybdenum alloys and boride. It has a better impact resistance and strip resistance than high chromium cast iron type materials

Product recommendation: GSQD621Mo-4(1.6mm)

6. Tungsten Carbide Pellets

With high sphericity & excellent alloy organization, cemented carbide pellet is mainly used in welding, as an adding material of PTA Powder , tubular welding rod, to improve the wear resistance of the workpieces greatly.

Product recommendation: GQ06

7. Tungsten Carbide Grits

Cemented carbide grit with different percent of cobalt has good abrasive resistance and is widely used for making grinding, polishing and cutting tools.

Product recommendation: GS08A

Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod

Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com