Heavy Load Large Table Electric Cargo Handling Wagon Trolley
Thermal Management System,Electric Water Pump Controller,Brushless Motor Electric Water Pump,Electric Water Pump New Energy Vehicle Fuxin Dare Automotive Parts Co., Ltd. (DARE AUTO) , https://www.fuxindareauto.com
Introduction of Handling Wagon Trolley
BWP series Handling Wagon Trolley is a kind of trackless material handling trolley, which means it can run on cement floor and no need to install rails. The Handling Wagon Trolley has at lest two casters, which could realize 360 degree motorized rotation without causing any damage to the floor. It is powered by storage battery, so it can turn freely without any cable strings. This electric trackless Handling Wagon Trolley is controlled to go forward and backward, turn left and right by pressing the buttons and speed controller. It also can be added with PLC control system for full automation.
Features of Handling Wagon Trolley
---- Low noise It causes low noise level.
---- Maximum safety Offers guarantee of maximum safety for operators and for the material handled. We really care about the safety of everyone involved in the job.
---- Easy for operation These transfer carts are easy to drive, so as soon as you get it you will be able to use it to transport your loads. We will support you to make the best out of your heavy load transporter.
---- Easy to implement into manufacturing process Operates on standard floors; Do not require complex or permanent installation
---- Suitable for All Kinds of Weight The battery powered trolley is superb for handling both small and extremely huge loads for its modular fabrication and its high payloads: up to 300 ton for each trolley.
Product show of Handling Wagon Trolley
Â
Production Process of Handling Wagon Trolley
CNC Cutting
Transport the steel plate from raw material warehouse to CNC cutting workshop for cutting. After the cutting, the workers will do some simple processing such as chip moving and setting out.
Preliminary Assembling
Put the cut steel plate together according to the design drawing
Welding
Weld the steel plate with automatic welding machine after the preliminary assembling
Post weld treatment
Test the welding section after the welding, polish and burring. Post weld treatment to eliminate welding stress
Spray Primer
Transport the structure part after processing to painting booth for spraying primer. The main component of the primer is zinc rich epoxy antirust paint. The primer is to two layers
Assembling
Assemble the structure parts after spraying primer with wheels, motors and gear box, etc.
Paint finish
Transport the assembled cart to painting booth, inspect the integrity of primer. After that paint the finish
Debugging
Debugging the cart after painting the finish with electric control system, after the debugging, the cart will test without load. And after the no load test, the cart will be tested with load. After the inspection, the cart will be transported to storage area.
Production Supply Scope
Product Name
Model
Power Supply Mode
Load Capacity
Running distance
Usage
Rail Transfer Cart
BDG
Conductor Rail
We can design 1-300t load transfer cart. The load capacity and table size is customized according to the working condition and the client's requirements.
 ≤70m
Ordinary goods,such as steel plate, workpiece,equipment etc special goods,such as coil. column,ladle etc
Battery Powered Transfer Car
BXC
Battery
Unlimited
Cable powered Transfer Trolley
BJT
Cable Drum
≤50m
Electric Transfer Cart
BTL
Trailing Cable
≤20m
Busbar Powered Handling Cart
BHX
Busbar
Unlimited
Towed Rail Trailer
BP
Towed by other machine
Unlimited
Steerable Towed Car
BWT
Manually or towed by forklift or other machine
1-150t on cement or steel floor.
Unlimited
Trackless Handling Machine
BWP
Battery
Unlimited
Packing & Shipping
*For length is less than 6m, the width is less than 2.2m. It will be transported by 20ft container. If the length is longer than 5.9m and less than 12m, it will be transported by 40ft container. If the quantity is 2 sets or 3 sets, they can be transported by full container. If the quantity is 1 set, it can be transported by LCL Container.
*If the length is less than 12m, the width is beyond 2.2m. It needs to be transported by flat rack (20 or 40 ft) . If the equipment is beyond above dimension, and quantity need to consider bulk cargo.
Factory and Customer