Real estate pushes the lighting industry lighting price index to rise again

April 16, 2024

In May, the Guzhen Lighting Price Index released five data, which were 119.5 points, 121.95 points, 121.43 points, 119.61 points and 117.69 points, and the monthly average was 120.04 points, which was 2.72 points higher than the April average of 116.85 points. In May this year, the lighting price index performed well overall. Although the latter three consecutively fell, it hit a record high of 121.43 points in the middle of the month. In May this year, the overall index rose by 17.63 from the previous month's 102.05 points. Obviously, this year's market trading atmosphere is warmer than the same period last year. Lighting lighting products are associated with a wide range of industry markets as a wide range of applications and end products. Among them, the real estate industry is one of the industries that have a greater impact on the lighting market, so the trend of the lighting market is also full of variables due to changes in the real estate market. Since the end of March, the policy of stabilizing housing consumption has also been introduced one after another. The latest data once again confirms that the real estate market is recovering, and the Central Political Bureau proposed on April 30 to establish a long-term mechanism for the healthy development of real estate. Therefore, the real estate market is destined to usher in a round of upswing in May, and the lighting and lighting market will also tend to be positive. On the whole, the volume of the national real estate market in May did indeed continue to rise, which in turn led to the continued rise in the price index. The average monthly average of the four series of indices in May was two liters and two drops, specifically: The average number of commercial lighting series in May was 99.42 points, down 2.25 compared with April; the average number of outdoor lighting series in May was 112.91 points, compared with April. It rose by 2.08. The average number of lighting series in May was 131.7 points, up 4.33 from April; the average number of light source series in May was 95.91 points, down by 0.06 from April; the commercial lighting series index rebounded. The commercial lighting series fell by 2.3 in May compared with April, especially in the mid-term report of 95.83 points. It hit a new low and then rebounded to 103.75 points, which was the main force driving the rise of the general index. With the continuous upgrading of domestic consumption structure, people's demand for lighting lighting products is increasing, and the quality of space decoration is becoming more and more important. The demand will remain strong in the future, especially the continuous upgrading of commercial lighting. The commercial lighting will be widely used and upgraded, and its competition is more reflected in the price competition under the homogenous level, so the change response of commercial lighting is more sensitive. In general, the volatility of various segments of commercial lighting is still relatively large, which is related to the size of shipments of different products. The outdoor lighting series index is first raised and then suppressed. The outdoor lighting index began to rise slightly from the middle of the first quarter in April. It surged 5.6 at the end of the month to 118.23 points, and then fell 4.51 to 112.9 points. The overall performance was more active. A large market for outdoor lighting products is the supporting demand for residential communities. This aspect continues to grow with the recovery of the real estate market, while the demand for municipal construction and public parks varies from month to month and is transmitted to bulk purchases. The market average price of outdoor lighting has also changed by a large margin, which has become a major factor affecting the overall instability of outdoor lighting. The lighting series index rebounded. As the most important mainstream product in the lighting industry, the lighting series has been rising since April, and it has reached a record high of 135.71 points. Although the average of the lighting series index was 131.7 points in May, which was 4.33 more than that in April, overall, the lighting series in May was insufficiently supported. It began to decline gradually in the latter half of the year, and the decline was obvious. The overall lighting lighting market was tepid. status. As the domestic real estate market is gradually warming up, the property market transaction is in a partial recovery state, and the lighting series index will maintain the current high position stealth trend for some time to come. It is expected that the exhibition effect of large-scale exhibitions such as the Guangya Exhibition will be improved in June. The light source series index fluctuated and fell. The light source series index averaged 95.91 points in May, down 0.06 from April, and took over the fluctuations in April. The analysis believes that the manufacturers in May fully resume production, the supply and demand relationship of light source products tend to balance, and the price index of the left and right light source series is mainly the raw material price and technical level. Under the environment of stable raw material prices, traditional light sources are gradually promoted and applied by green lighting LED products. The price is in a certain fine-tuning interval, and gradually recovers in the later period but the magnitude is not large. The main reason for the change in the later trend depends on the trend of rare earth prices and the second half. The state further regulates the policy tone of the rare earth industry pattern; while the new LED light source has been popular, it will continue to rise in the future for a period of time, and the momentum is difficult to stop. Under the influence of the traditional light source and LED light source, the light source series index is difficult to show a stable trend in the short term. Summary: In May of this year, the major series of indexes were relatively stable, which can be regarded as the concentrated performance of the lighting market in the annual timeline, and the support of the lighting market is still related to the prosperity of the real estate market and the domestic export situation. Xiao Yan. Since June will usher in the world's largest lighting exhibition LED exhibition 2015 Guangzhou International Lighting Exhibition, thanks to the promotion of the exhibition effect, it is expected that the market atmosphere in June will become more and more intense, more and more enthusiastic, the overall index trend will be A slight increase.
Laser Cladding Powder
Nickel Based Laser Cladding Powder

Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.

Cobalt based Laser Cladding Powder

Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.

Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.

Iron based Laser Cladding Powder

The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.

WC blended Laser Cladding Powder

Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.

Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com