Air Unit Source Treatment Units (FESTO FRL)
Plastic Consumer Electronic Parts Mold
china OEM plastic injection molding service Plastic Injection Mold for Consumer electronics parts
Plastic-injection molding is the preferred process for manufacturing plastic parts, as it is ideal for producing high volumes of low-cost plastic parts with high tolerance precision, repeatability and little to no finishing required.
One stop supplier for plastic products since 2010, also mould export is available.
Battery Connector Mold,Plastic Consumer Electronic Parts Mold,Electrical Components Injection Mold,Electrical Plastic Parts Molding DongHui Mold Machinery Co.Ltd , https://www.dhform.com
Combinations:
1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.
2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available
3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.
4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient
Features:
1, FESTO type and quality, can be replaced the Festo same type products.
2, XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)
3, You can use it independent or use the FRL together in the automation area.
4, Smart design and best performance
5, Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.
Summary:
Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements
FESTO FRL air units
Combinations:
1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.
2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available
3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.
4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient
Features:
1, FESTO type and quality, can be replaced the Festo same type products.
2, XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)
3, You can use it independent or use the FRL together in the automation area.
4, Smart design and best performance
5, Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.
Summary:
Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements
We are able to offer you flexible options for price , quality and also for lead time,since we have production line and mold making line in China.