C50 Roller Shell for Wood Pellet Mill
Zowell RSEW multi-directional forklift is a
material handling equipment designed for long and bulky material handling and
stacking. Its unique design covers the advantages of common forklifts and stackers
as well as 3-way VNA trucks. With three omni-directional wheels, it can drive in
multiple directions such as parallel moving and oblique moving, so as able to
maneuver smaller aisles and maximize your warehouse storage safely.
As a company with experience on narrow
aisle electric forklifts for more than 15 years, Zowell always focuses on
professional warehouse solutions and customer experience. RSEW series is featured with electric power featured with low noise and no emission, and
can be equipped with lithium battery with convenient maintenance and longer
service life. The load wheels are equipped with the
five-stage steering deceleration and small control current, which enables the
steering angle more precise and controllable, effectively extend the service
life of the steering motor. From the aspect of security, Zowell
multi-directional forklift is equipped with steering wheels display system and
barking system to maximize safety.
In general, the man-machine engineering
simulation design makes RSEW easier to operate, more accurate in control,
providing a perfect solution for long materials handling and stacking. Meanwhile,
we provide various types according to load capacity and lift height as well as
additional options such as fork positioner and AGV modification to meet your practical
needs. Please refer to the parameters attached on our products or ask our staff
for help in any case.
Electric Hand Pallet Jack,Standing Pallet Jack,Electric High Lift Pallet Truck,Motorized Pallet Truck Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
Â
Type
honey-comb type, teeth or customized
Application
spare parts for pellet mill, like feed pellet mill, bio-mass pellet mill
Our roller shell is for pellet mill from CPM, BULHER, MUYANG, ETC
Feature of FDSP roller shell
1Roller shell,made of wear resistant alloy raw material, processed by fine and heat treatment;
2Made of bearing steel, high hardness, good wearing resistance, long life, different tooth depth and shape at option;
3 Tooth surface forms of roller shell, good to pelleting performance
4 Frequently-used roller shell tooth form:honeycomb,scallop shape and scallop shape with edge banding
5 Honeycomb,scallop shape, the two types of roller shell is mainly used in livestock and poultry feed pelleting.
6 The advantage of honeycomb rolller shell is the even wearing of ring die, but coil performance is bad.
7Scallop-shaped roller shell features good coil performance, widely used among feed mills, but wearing of ring die is not even.
8Scallop shape with edge banding, this kind of roller shell is applicable for aqua feed. Feed is not easy to slide towards both sides when being extruded.
Plenty of pellet mill parts are in stock.
Â
Product Description:
Roller shell, commonly known as roller, is one of the main work parts in pellet mill and is applied for processing various kinds of biomass fuel granule, animal feed pellet and other pellets. It is made of wear resistant alloy steel with carburization heat treatment, featuring even hardness and long service life. It is divided into tooth through type, tooth no through type and pass type. Rolling parts such as inner eccentric shaft are precise in size, facilitating space adjustment by customers between roller and ring die according to production requirement. It is also characterized by ease of mounting and replacing.
Â
Products photo:
Â
Notice:
1.Select correctly appropriate die hole compression ratio
2.Correctly adjust the working clearance between ring die and roller, from 0.1 to 0.3 suitable.(after new pellet mill being switched on, roller, driven by ring die, getting into a state of prerunning,but not rotating.)
3.New ring die should match new roller to use.Roller connecting with ring die must be loose in front and tight in back.When roller two sides appear sharp corners, it should be timely used hand grinder to blunt the flange part so as to have a good connection of roller and ring die.
4.Before raw material fed into pellet mill,precleaning and magnetic separation treatment is necessary in order to minimize iron impurities of getting into die hole.Checking regularly the die hole is also essential to see whether the die is blocked and accordingly clean the blocked die hole.
5. If plastic deformation happens to ring die guiding material cone hole,causing hole shrinking, it must be repaired.During repairing, pay attention to that ring die inner surface lowest height must be 2mm higher than the bottom of overtravel groove.In addition,the eccentric shaft adjusting must allows an extra, otherwise ring die should be scraped.Â
Roller Shell_Pellet Mill Roller Shells For Sale
Â
Type
honey-comb type, teeth or customized
Application
spare parts for pellet mill, like feed pellet mill, bio-mass pellet mill
Our roller shell is for pellet mill from CPM, BULHER, MUYANG, ETC
Feature of FDSP roller shell
1Roller shell,made of wear resistant alloy raw material, processed by fine and heat treatment;
2Made of bearing steel, high hardness, good wearing resistance, long life, different tooth depth and shape at option;
3 Tooth surface forms of roller shell, good to pelleting performance
4 Frequently-used roller shell tooth form:honeycomb,scallop shape and scallop shape with edge banding
5 Honeycomb,scallop shape, the two types of roller shell is mainly used in livestock and poultry feed pelleting.
6 The advantage of honeycomb rolller shell is the even wearing of ring die, but coil performance is bad.
7Scallop-shaped roller shell features good coil performance, widely used among feed mills, but wearing of ring die is not even.
8Scallop shape with edge banding, this kind of roller shell is applicable for aqua feed. Feed is not easy to slide towards both sides when being extruded.
Plenty of pellet mill parts are in stock.
Â
Product Description:
Roller shell, commonly known as roller, is one of the main work parts in pellet mill and is applied for processing various kinds of biomass fuel granule, animal feed pellet and other pellets. It is made of wear resistant alloy steel with carburization heat treatment, featuring even hardness and long service life. It is divided into tooth through type, tooth no through type and pass type. Rolling parts such as inner eccentric shaft are precise in size, facilitating space adjustment by customers between roller and ring die according to production requirement. It is also characterized by ease of mounting and replacing.
Â
Products photo:
Â
Notice:
1.Select correctly appropriate die hole compression ratio
2.Correctly adjust the working clearance between ring die and roller, from 0.1 to 0.3 suitable.(after new pellet mill being switched on, roller, driven by ring die, getting into a state of prerunning,but not rotating.)
3.New ring die should match new roller to use.Roller connecting with ring die must be loose in front and tight in back.When roller two sides appear sharp corners, it should be timely used hand grinder to blunt the flange part so as to have a good connection of roller and ring die.
4.Before raw material fed into pellet mill,precleaning and magnetic separation treatment is necessary in order to minimize iron impurities of getting into die hole.Checking regularly the die hole is also essential to see whether the die is blocked and accordingly clean the blocked die hole.
5. If plastic deformation happens to ring die guiding material cone hole,causing hole shrinking, it must be repaired.During repairing, pay attention to that ring die inner surface lowest height must be 2mm higher than the bottom of overtravel groove.In addition,the eccentric shaft adjusting must allows an extra, otherwise ring die should be scraped.Â
