The Imported Complete Equipment Quality Should Be Paid Attention to
Clear Flat bag is made from Food Grade Virgin material. environmentally friendly and hygienic. They are water-proof, Moisture-proof, strong toughness, tear resistance, good for storage and usually for packing sugar, biscuits, candy, coffee bin, fruits , drinks or other foods. Normally width from 3 inch to 12 inch. Length from 7 inch to 22 inch. Material could be in HDPE or LDPE.
Clear Flat Bags, Polyethylene Flat Bags, Clear Flat Polyethylene Bag, Side Seal Bag, Clear Bag, Crystal Clear Side Gussets Bags BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.plastics-billionjm.com
It is understood that the inspection and quarantine department discovered during the inspection process that these unqualified equipment mainly suffered from shortages in quantity, intrinsic quality defects in equipment, and unqualified safety performance. To this end, the Bureau reminds importers to pay attention to the following issues: First, the safety performance of the machinery is unqualified. The whole set of equipment is exposed with bare moving parts and no safety protection device. The movable guard doors and hoods are not equipped with interlocking protective devices according to the national mandatory standards. The dangerous parts that may cause harm to the operators on the equipment are not provided with safety warning signs according to the national mandatory standards.
The second is the unqualified electrical safety performance. The grounding wire and grounding mark of the equipment do not meet the national mandatory standards and there is no effective grounding. The inner conductor of the equipment has no fixed measures and the configuration is disordered, the live parts are exposed, no insulation protection measures are taken, and the electrical safety standards are not met. The voltage of imported equipment is single-phase 110VAC or three-phase 220VAC, which is inconsistent with the standard voltage in China.
The third is the shortage of quantity. The shortage of arrivals was mainly due to imported textile machinery such as texturing machines. The reason is that the supplier failed to deliver the goods in time according to the time stipulated in the contract, resulting in the Chinese consignee not being able to install the equipment in time and put it into production.
Fourth, quality problems: The quality of the components of the textile machinery such as texturing machines that are imported is of poor quality, and the equipment cannot be used normally. The equipment failed during the warranty period.