Sprinkler use tips
Some people always think that there is no difficulty in the operation of the sprinkler , as long as the switch is turned on to run on the road, but it is easier said than done, sprinkler is not so simple operation, and there is a certain in use skill. First of all, the focus of the sprinkler is as its name suggests. Sprinklers sprinkle water of course, but some people use river channels and some river ponds instead of tap water or other water in order to save costs. The water, these sources of water will inevitably have impurities, but it can basically achieve the purpose, but the sprinkler in the suction water as much as possible into the water into the nozzle, so as not to inhale more sediment blocking the pipe, but the general configuration of the sprinkler will With more comprehensive filtration facilities, some rivers may not be deep if the water source is not deep enough so as not to inhale some impurities. However, sometimes the sprinkler pumps for different models are also different. Some clear water pumps require clear water, but they cannot tolerate any impurities. Generally, when a pump is pumped, it usually needs some water diversion. When it is added, it needs to close its water inlet. Normally, it is used for the first time when it is used for water diversion. Do not add it afterwards. When entering the water, the water pipe should be kept as vacuum as possible so that the water can be sucked into the water tank more easily, and the water inlet system also needs a good seal, so as to ensure that the water can be sucked into the water. Be sure to pay attention to the water in winter. Because the temperature in winter is low, the water in the compartment is very easy to freeze. Once the frozen water tank expands, it will freeze the water tank. Therefore, after the end of winter construction, you must know how to discharge water! The position of the sprinkler head is also very important. The lower the position of the sprinkler, the greater the pressure of the spray. This can be used to clean the floor, and the spray head is higher in the density of the sprinkler. The effect of cleaning the dust is better. some. Sprinklers are also required to conduct regular effluent discharges, even if there are impurities in the clean water tank that need to be regularly removed.
With the rapid development of industry, Insert Radiator has been widely applied in all kinds of fields depending on the excellent advantages of good heat-conducting, high strength, strong Oxidation resistance, long life etc. The kind of Air Cooled Plate is reliable, safe, stable, easy to operate.
1. Customized designs are accepted.
3. Good looking and high performance radiator.
Air Cooled Plate Customized Air Cooled Plate,Insert Radiator,Air Cooled Heat Exchanger,Industry Air Cooled Plate,Heat Exchanger of Fold Plate Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com
2. CNC machining machined, high precision.
