Steel Coil Cross Shear Cut to Length Line Machine
welding performance. Silver coating was first used in decoration. In the electronics industry, communications and instrumentation industry, the use of silver plating to reduce the resistance of metal parts, improve the welding performance of metal. The metal mirrors in the searchlights and other reflectors also need to be plated with silver. Jin Yuan Kang silver can prevent corrosion products, increase conductivity, light and beautiful appearance. Widely used in electrical appliances, instruments, meters and lighting equipment manufacturing industry. Such as copper or copper alloy plating, must first after degreasing derusting solution; pre plating thin silver or immersed by mercuric chloride prepared in the treatment of mercury, which was coated on the surface of workpiece is a layer of mercury film; then parts as cathode, silver plate as the anode and electrolyte of Potassium Silver Cyanide immersion by silver nitrate and potassium cyanide compounded in electroplating. Electrical equipment, instruments and other industries also use cyanide free silver plating. Thiosulfate, sulfite, thiocyanate, ferrocyanide, etc.. In order to prevent discoloration of the silver coating, usually after plating treatment, mainly immersion, chemical and electrochemical passivation, precious metals or precious Metal Plating or coating layer, etc.. Ag(Silver) Plate,Electroplating Silver Products,Wholesale Silver Plate Jin Yuan Kang Industry Co., Ltd. , http://www.jykplating.com
Thin plate cut to length line (0.2-4.0mm)
1. Â Used for metal plate coil uncoiling, leveling, set length, cutting the set size and stacking. This line used for processing cold rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and other different kinds of surface plating metal.
 2.   Cut to length line is mainly composed of entry coil car, uncoiler, leveler, looping bridge, side guide, servo feeding device, shearing machine, transfer table, stacking device, etc. This line can configure trimming device.
Â
 3.  This production line Hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts AC Broadband motor, Inverter adopts Omron, which has high degree of automation, high shearing precision,stable and reliable performance, Easy operation and maintenance, etc
Parameters
Â
Model No.
Parameter
Coil thickness
(mm)
Coil width
(mm)
Shearing precision/set length (mm)
Shearing speed (pcs/min)/set length (mm)
Coil
weight
(T)
Stacking length (mm)
Remark
HFCL-2×1300
0.2-2
200-1300
±0.5/2000
22pcs/min/2000
10T
500-2000
Technical data, configuration can according to customer requirement.
HFCL-2×1600
0.3-2
200-1300
±0.5/2000
22pcs/min/2000
15T
500-3000
HFCL-3×1600
0.5-3
200-1300
±0.5/2000
20pcs/min/2000
15T
500-3000
HFCL-3×2000
0.5-3
200-1300
±0.5/2000
20pcs/min/2000
15T
500-3000
HFCL-4×1600
1-4
300-1600
±0.5/2000
15pcs/min/2000
20T
500-4000
HFCL-4×2000
1-4
300-1600
±0.5/2000
15pcs/min/2000
20T
500-5000
Thick plate cut to length line (4-22mm)
1. Â Cut to lenth line is used to cut hot-rolled steel coil, stainless steel coil, aluminum coil, cut into various specifications of the size, this line also can have trimming function, make the width size meet customer requirements
2.This cut to length line is composed of entry coil car, uncoiler, material-feeding device, simple leveler, transfer bridge, trimming shearer(optional), leveler, setting length device, plate feeder, cutting device, transfer table, thrower stacking device, Hydraulic system and electric control system
3. Â Â This production line hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller and Taiwan WEINVIEW touch screen to control all functions, main motor of leveler adopts high power DC motor, DC controller adopts ETD products, which has high degree of automation, high shearing precision, stable and reliable performance, easy operation and maintenance, etc
 Parameters
Â
Model No./parameter
Coil thickness
(mm)Coil width
(mm)Shearing precision/set length (mm)
Shearing speed (pcs/min)/set length(mm)
Coil weight
(T)Stacking length
(mm)Remark
HFCL-6×2000
1-6
500-2000
±0.8/2000
10pcs/min/2000
30T
500-6000
Technical data, configuration can according to customer requirement.
HFCL-8×2000
2-8
500-2000
±2.5/6000
3pcs/min/6000
30T
500-8000
HFCL-10×2000
2-10
500-2000
±2.5/6000
3pcs/min/6000
30T
500-10000
HFCL-12×2000
3-12
500-2000
±2.5/6000
3pcs/min/6000
35T
500-12000
HFCL-16×2200
4-16
500-2200
±2.5/6000
3pcs/min/6000
35T
500-15000
HFCL-20×2200
4-22
500-2200
±2.5/6000
3pcs/min/6000
35T
500-15000
Machine video linkÂ
https://www.facebook.com/photo.php?v=1681723778734755
Certification
Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Â
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.
Â
As the silver coating is a bright reflection, the heat generated by the infrared radiation can be a good reflection back to achieve better insulation effect. So the silver plated hot water pot has a better role of heat preservation.