Custom Silicone/Viton/EPDM Rubber Oil Pan/Engine Gasket/Seal/Washer/O Ring Sheet
In the beginning of 2015, Cixi Air-Fluid Brass Nickel-Plated Push to Connect Fittings passed 90,000 impulse test @ 500 bar working pressure in U.S.A Customers' Labotory.
Cixi Air-Fluid Brass Nickel-Plated Push To Connect Fittings passed the Quality tested by "National Quality Supervision and Inspection Center of Pneumatic Products" .
All the Cixi Air-Fluid NPT Tapered Threads with a groove on Hexagon body to easily distinguish it from the BSPT Tapered Threads Fittings.
The Cixi Air-Fluid fittings' come into configurations as below:
a.Brass Straight MNPT Male Push to Connect Fittings
NPT Thread Brass P.T.C Fittings NPT Thread Brass P.T.C Fittings, PTC Air Fittings, NPT Brass Fittings, NPT Thread Fittings Ningbo Air-Fluid Pneumatic Components Co., Ltd , http://www.air-fittings.com
Plunger Seal, Lip Seal, also called Piston Seal, Radial Seal & Rod Seal, consists of outside diameter lip and inside diameter lip, which is used for fluid seals and specifically designed as piston seals to work in pneumatic and hydraulic cylinder applications, also known as Rubber Pneumatic seals and Rubber ydraulic Seals.
Silicone Lip seal is a self-sealing ring, it relies on the lip and close to the surface of the sealing coupling, obstructing the leakage channel to obtain the sealing effect. The working pressure of the lip seal is the sum of the pre-pressing force and the fluid pressure. When the pressure of the sealing medium is increased, the lip is distracted and more closely fit with the sealing surface, so that the sealing performance be enhanced further. In addition, the lip edge also has the scraping oil function which also enhance the sealing performance of the seal.
Rubber Lip Seal is made of high grade silicone, liquid silicone rubber(LSR), NBR, FKM, PU Rubber, etc, which mainly produced by Silicone Rubber Compression Mold tooling or LSR injection Molding (LIM) with middle mold plates.
Rubber Lip Seal & Rod Seals application environment and working speed ranges:
Working pressure: < 25 MPa
Working temperature: -40~+120ºC
Medium: hydraulic oil, water, air
NBR: 0.01~0.6 m/s
FKM: 0.05~0.3 m/s
PU rubber: 0.01~1 m/s
Â
Lip seals are mainly used in reciprocating seals, and compare with extrusion seals, such as O-ring, the reciprocating seal makes lip seals better overall performance, and longer service life.
Description
Y-shaped seal(Lip Seal)
O-ring seal(Extrusion Seal)
Advantage
Seal section size is small, the installation groove can be designed as a monolithic groove; groove processing, seal installation easy,can be used as two-way seal (dual pressure)
Excellent seal performance;
Low friction at low pressure;
Automatically compensate after small amount of wear.
Disadvantage
Poor sealing performance;
Easy to roll and twist, causing damage easily;
The lower friction margin,the poorer sealing performanceOne-way seal;
Complex sealing structure,large size;
Cause oil pressure between two seals;
Main Application
Small size slide valve;
Piston and rod seals which allow a small amount leakagePiston and rod seals which require high seal performance.
Xiamen Better Silicone Rubber Co.,ltd advantages for Silicone Lip Seals Production
1. Precision Own Mold-Making Technology since 1998, one stop service for silicone rubber compression molded components, plastic injection molded and liquid silicone rubber molding components.
2. In-depth knowledge of Rubber Lip Seals materials molded
3. In-depth knowledge of silicone rubber Rod Seals mold-making technology and Piston Seal molded technology.
For Plunger Seal & Piston Rod purchasing, the following factors should be comprehensively considered:
Piston Rod movement speed
Piston Rod's starting friction
Piston Seal Working pressure
Rod Seal Working temperature
Plunger Seal working medium viscosity
Allowable tolerance for leakage
Lip Seal's groove size
Rod Seal's fit tolerance for Piston Rod
Â
Custom Plunger Seals for Fast quotation:
1. Offer 2D & 3D designs drawings, samples or tell us your ideas.
2. Materials demands: Solid Silicone, Liquid silicone rubber
3. Materials Grade demands: food grade & medical grade materials, high elastic materials
4. Hardness & Durometer demands: 10-80 Shore A ( Durometer)
5. Working Environment & Usage: Working temperature, flow chemical environment and Sealing or Open Pressure Demands & Testing etc.
6. Production environment Demands: If need clear room
7. Package Requirement: If need Air in packing bag to prevent deformation or damage etc.
Â
Custom Silicone/Viton/EPDM Rubber Oil Pan/Engine Gasket/Seal/Washer/O Ring Sheet
Plunger Seal, Lip Seal, also called Piston Seal, Radial Seal & Rod Seal, consists of outside diameter lip and inside diameter lip, which is used for fluid seals and specifically designed as piston seals to work in pneumatic and hydraulic cylinder applications, also known as Rubber Pneumatic seals and Rubber ydraulic Seals.
Silicone Lip seal is a self-sealing ring, it relies on the lip and close to the surface of the sealing coupling, obstructing the leakage channel to obtain the sealing effect. The working pressure of the lip seal is the sum of the pre-pressing force and the fluid pressure. When the pressure of the sealing medium is increased, the lip is distracted and more closely fit with the sealing surface, so that the sealing performance be enhanced further. In addition, the lip edge also has the scraping oil function which also enhance the sealing performance of the seal.
Rubber Lip Seal is made of high grade silicone, liquid silicone rubber(LSR), NBR, FKM, PU Rubber, etc, which mainly produced by Silicone Rubber Compression Mold tooling or LSR injection Molding (LIM) with middle mold plates.
Rubber Lip Seal & Rod Seals application environment and working speed ranges:
Working pressure: < 25 MPa
Working temperature: -40~+120ºC
Medium: hydraulic oil, water, air
NBR: 0.01~0.6 m/s
FKM: 0.05~0.3 m/s
PU rubber: 0.01~1 m/s
Â
Lip seals are mainly used in reciprocating seals, and compare with extrusion seals, such as O-ring, the reciprocating seal makes lip seals better overall performance, and longer service life.
Description
Y-shaped seal(Lip Seal)
O-ring seal(Extrusion Seal)
Advantage
Seal section size is small, the installation groove can be designed as a monolithic groove; groove processing, seal installation easy,can be used as two-way seal (dual pressure)
Excellent seal performance;
Low friction at low pressure;
Automatically compensate after small amount of wear.
Disadvantage
Poor sealing performance;
Easy to roll and twist, causing damage easily;
The lower friction margin,the poorer sealing performanceOne-way seal;
Complex sealing structure,large size;
Cause oil pressure between two seals;
Main Application
Small size slide valve;
Piston and rod seals which allow a small amount leakagePiston and rod seals which require high seal performance.
Xiamen Better Silicone Rubber Co.,ltd advantages for Silicone Lip Seals Production
1. Precision Own Mold-Making Technology since 1998, one stop service for silicone rubber compression molded components, plastic injection molded and liquid silicone rubber molding components.
2. In-depth knowledge of Rubber Lip Seals materials molded
3. In-depth knowledge of silicone rubber Rod Seals mold-making technology and Piston Seal molded technology.
For Plunger Seal & Piston Rod purchasing, the following factors should be comprehensively considered:
Piston Rod movement speed
Piston Rod's starting friction
Piston Seal Working pressure
Rod Seal Working temperature
Plunger Seal working medium viscosity
Allowable tolerance for leakage
Lip Seal's groove size
Rod Seal's fit tolerance for Piston Rod
Â
Custom Plunger Seals for Fast quotation:
1. Offer 2D & 3D designs drawings, samples or tell us your ideas.
2. Materials demands: Solid Silicone, Liquid silicone rubber
3. Materials Grade demands: food grade & medical grade materials, high elastic materials
4. Hardness & Durometer demands: 10-80 Shore A ( Durometer)
5. Working Environment & Usage: Working temperature, flow chemical environment and Sealing or Open Pressure Demands & Testing etc.
6. Production environment Demands: If need clear room
7. Package Requirement: If need Air in packing bag to prevent deformation or damage etc.
Â
b.Brass Straight Female NPT Push to Connect Fittings
c.90 Degree Elbow Brass Push to Connect Air Hose Fittings
d.Nickel-Plated Brass Branch Tee Push to Connect Fittings
e.Nickel-Plated Brass Run Tee Push to Connect Fittings
f.Brass N.P Bulkhead Female NPT Thread Fittings
