Dw-Re-2000 Cheap Water Dual-Purpose Rotary Evaporator
Outdoor Escalator,Residential Escalator,Automatic Escalator,Smooth Escalator IFE Elevators Co.,Ltd. , https://www.ife.cn
Characteristics
1. DW-RE-2000 water bath rotary evaporator has beautiful design, its structure is reasonable and compact, simple and easy operation, precise temperature control and reliable performance.Besides, strong and durable are also its important advantages.
2. DW-RE-2000 rotary evaporator has two kinds condenser:A type ball milling port condenser and B type standard milling port screw thread condenser. Customer could choose condenser based on actual needs. Temperature range RT-90ºC, when temperature is higher than set temp. Value, heating tube automatic stop heating. This type water bath volume is small, so temperature rising is rapid.
3. One time forming 4.5L heating bath use teflon composite material, easy cleaning. Design equiped with vacuum meter and valve, so as to avoid liquid in vacuum pump return flow into evaporation flask, help your research success at one time.
Â
Technical Parameters:
Model
DW-RE-2000A
Host
Rocker plate type buttons , automatic lifting  0-150mm
Vacuum degree
< 399.9Pa(3mmHg)
Vacuum display meter
When vacuum degree reach lowest, close valve and keep display rotary evaporator vacuum degree, reduce laboratory noise, prolong vacuum pump service life.
Evaporation capacity
Max.25ml/min
Rotation speed
Digital display / rotary knob speed adjustment 0-200 rpm/min;Power 40W
Heating bath
One time forming teflon composite heating bath φ23×13cm, whole closed heating device,  Power 1.5KW
Temperature
Automatic control temperature, digital display, water bath, RT-90ºC±1ºC
Condenser
Vertical type, ball milling port condenser, cooling area 0.27
Material charging
Valve type material charging tube, connect with PTFE tube and retaining water circle.
Sealing ring
Fluororubber + PTEF vacuum seal washer.Â
Capacity range
0.25--2L
Power
1.5kw  Input voltage~220v/50Hz
Volume / Weight
71×46.5×51cm   30kg
Standard configuration
S35 ball milling port collecting flask 1L * 1pcs; Â 24# standard port evaporation flask 1L * 1pcs,2L* 1pcs
Â
Quality Control and After-Sales Service
Please don't worry, our products are superior in quality,  If you have any problems, please feel free to let us know, we are glad to support as below:
Â
Good quality firstly to avoid any defective products  ,  Protective packaging to avoid destroy during delivery ;   ( CE and ISO Certified ) Pure english operation manuals ; installation & operation vedio will be provided to you as guidance ;  No delay fast delivery service ( usually 7~15 working day after payment ) We could provide Online instruction ;  Real-time support by vedio-call or voice-chat . During warranty time, we can send product accessories when you need for free;  Technical guidance is free and ready forever . Your technicians can come to our factory for training , Drawell engineers can go your place for local support  ( installation , training , debugging, maintenance ); Products can be customized according to your requirements;  OEM serivce availabe with customers' brand. * Generaly the machine can use 5~10 years for average even longer if you use properly.
DRAWELL main products : Spectrophotometer ; Centrifuge ; Chromatography ; Balance ; Microscope etc.
Â
DW-RE-2000Â Rotary Evaporator (2L)
Characteristics
1. DW-RE-2000 water bath rotary evaporator has beautiful design, its structure is reasonable and compact, simple and easy operation, precise temperature control and reliable performance.Besides, strong and durable are also its important advantages.
2. DW-RE-2000 rotary evaporator has two kinds condenser:A type ball milling port condenser and B type standard milling port screw thread condenser. Customer could choose condenser based on actual needs. Temperature range RT-90ºC, when temperature is higher than set temp. Value, heating tube automatic stop heating. This type water bath volume is small, so temperature rising is rapid.
3. One time forming 4.5L heating bath use teflon composite material, easy cleaning. Design equiped with vacuum meter and valve, so as to avoid liquid in vacuum pump return flow into evaporation flask, help your research success at one time.
Â
Technical Parameters:
Model
DW-RE-2000A
Host
Rocker plate type buttons , automatic lifting  0-150mm
Vacuum degree
< 399.9Pa(3mmHg)
Vacuum display meter
When vacuum degree reach lowest, close valve and keep display rotary evaporator vacuum degree, reduce laboratory noise, prolong vacuum pump service life.
Evaporation capacity
Max.25ml/min
Rotation speed
Digital display / rotary knob speed adjustment 0-200 rpm/min;Power 40W
Heating bath
One time forming teflon composite heating bath φ23×13cm, whole closed heating device,  Power 1.5KW
Temperature
Automatic control temperature, digital display, water bath, RT-90ºC±1ºC
Condenser
Vertical type, ball milling port condenser, cooling area 0.27
Material charging
Valve type material charging tube, connect with PTFE tube and retaining water circle.
Sealing ring
Fluororubber + PTEF vacuum seal washer.Â
Capacity range
0.25--2L
Power
1.5kw  Input voltage~220v/50Hz
Volume / Weight
71×46.5×51cm   30kg
Standard configuration
S35 ball milling port collecting flask 1L * 1pcs; Â 24# standard port evaporation flask 1L * 1pcs,2L* 1pcs
Â
Quality Control and After-Sales Service
Please don't worry, our products are superior in quality,  If you have any problems, please feel free to let us know, we are glad to support as below:
Â
Good quality firstly to avoid any defective products  ,  Protective packaging to avoid destroy during delivery ;   ( CE and ISO Certified ) Pure english operation manuals ; installation & operation vedio will be provided to you as guidance ;  No delay fast delivery service ( usually 7~15 working day after payment ) We could provide Online instruction ;  Real-time support by vedio-call or voice-chat . During warranty time, we can send product accessories when you need for free;  Technical guidance is free and ready forever . Your technicians can come to our factory for training , Drawell engineers can go your place for local support  ( installation , training , debugging, maintenance ); Products can be customized according to your requirements;  OEM serivce availabe with customers' brand. * Generaly the machine can use 5~10 years for average even longer if you use properly.
DRAWELL main products : Spectrophotometer ; Centrifuge ; Chromatography ; Balance ; Microscope etc.
Â