Food Grade Stainless Steel Sanitary Tri Clamped Check Valve
BRIGHT STEEL BAR
Bright steel bar is carbon or alloy steel bar with shining bright surface which is improved by cold drawing, peeling, turning, grinding and polishing over hot rolled black surface bars. By cold drawing, the steel bar yield strength and tensile strength will be improved. By peeling and turning, the surface imperfections will be removed. By grinding, the diameter tolerance will be more precision. By polishing, the surface will be much more shining.
Except the shining bright surface, comparing with the hot rolled black surface bars, the bright steel bars has better surface roughness, better roundness, straightness, more precision size tolerance etc.
Heat treatment such as annealing, normalizing, quenching and tempering will be done before do cold finishing on the hot rolled bar to get bright steel bar, in such condition, the steel bright bar will get most suitable mechanical properties to meet different application requirement.
The advantages of steel bright bars we supply:
1) Big stocks of hot rolled round bars or wire rods as raw materials
2) Heat treating furnaces to adjust the mechanical properties
3) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.
4) Multiple packages to avoid broken packages and anti-rusty
Diameter tolerance
+0/-0.02mm
Straightness
0.5mm/m
Surface roughness
0.4um
Roundness
80% of diameter tolerance
Diameter range
14mm to 100mm
Steel grade
Kinds of carbon steel and alloy steel
Length
Any length can be cut with precision tolerance
Bright Steel Bar,Bright Steel Round Bar,Steel Bright Bar,Bright Polished Steel Bar,Alloy Steel Bright Bar Manufacturer SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com
Brand: Flowtam
Material :304(L) 316(L)
Finish:Mirror or Matt Polish; Ra<0.4um
Certification: CEÂ ISO9001:2000
Tech Data:
Size : DN15-DN200Â 1/2"-8"
Standard: DIN,SMS,3A,ISO,IDF
Material: AISI304(L)Â AISI316(L)
Connection Type: Weld, Clamp, Thread
Polish: Mirror Polish Ra<0.4um
Max. Working pressure:Â 1.0 MP(10bar)
Min.Working pressure:Â Vacuum
Working Temperature: -5°to 95°
Material:The parts contact with the liquid adopt AISI 304 or AISI 316L
Other Parts :Adopt AISI 304
Sealing Material: Silicon , EPDM , PTFE
Application:Â Dairy, beer, food, beverage, pharmacy, biotechnology, etc
Â
name
sanitary check valve
material
ss304,ss316
size
1/2"-10" DN15-DN250
connect
tri clamp,weld
Â
Â
Photos of the Sanitary Check Valves
