Arc Voltage Torch Height Controller for Plasma Cutter
Submersible Slurry Pump
Type SP is all metal material, suit for
abrasive duty.
Type SPR is elastomer protected, suit for
acid / abrasive duty.
Type SP and SPR pumps are vertical, centrifugal slurry pumps submerged
in sump to work. They are designed for delivering abrasive, large particle and
high density slurries. These pumps have no need of any shaft seal and sealing
water. They can also be operated normally for insufficient suction duties.
which is suited for the working condition of deeper level. The guide
bearing construction is added to the pump on the basis of the standard pump, so
the pump is with both more steady operation and wider application range, but
flushing water should be attached to the guide bearing.
Wet parts of type SP pump are made of abrasion-resistant metal
All parts of type SPR pump immersed in liquid are lined with rubber
outer liner. They are suited to transport no-edge angle abrasive slurry
The type with [L" is a sump pump of extension shaft series, which is
suited for the working condition of deeper level. The guide bearing
construction is added to the pump on the basis of standard pump, so the pump is
with both more stable operation and wider application range. But flushing water
should be douche the guide bearing.
Submersible Slurry Pump,Submersible Pump For Slurry,Flygt Submersible Slurry Pump,Double Suction Slurry Pump Shijiazhuang BeiKeDeRui Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com
1)Quick Detail
1. Any type of plasma
2. Automatic submerged arc welding
2)Structural Features
1. Designed for portable CNC cutting machine
2. High induction sensitivity, run smooth and stable
3. Set upper and lower limit switch inside, reduce the loss of motor, prolong the service life.
3) Applications:
Used for cutting torch auto height control of plasma cutting machine, it is suitable for vast majority of imported or domestic models of plasma.
4)Working Principles:
Using basic constant current of plasma power source characteristics, by testing the change of plasma arc voltage to test the change of plasma cutting torch height in the process, realize the control of cutting torch height.
5)Maintenance Skills:
1. Install the torch height controller correctlly.
2. Replace the consumbles in time before completely damaged.
3. Avoid the collision of the torch height controller.
4. Keep the connection threads clean.
5. Check if there are loose parts.
6)Competitive Advantage:
1. Professional manufacturer for CNC Cutting Machine Accessories
2. More than 16 years experience
3. Factory direct price and on time delivery
4. Secure Ordering and worldwide delivery
5. Sample available
6. Small quantity acceptable
7. OEM workable
Arc Voltage torch Height Controller for Plasma Cutter
1)Quick Detail
1. Any type of plasma
2. Automatic submerged arc welding
2)Structural Features
1. Designed for portable CNC cutting machine
2. High induction sensitivity, run smooth and stable
3. Set upper and lower limit switch inside, reduce the loss of motor, prolong the service life.
3) Applications:
Used for cutting torch auto height control of plasma cutting machine, it is suitable for vast majority of imported or domestic models of plasma.
4)Working Principles:
Using basic constant current of plasma power source characteristics, by testing the change of plasma arc voltage to test the change of plasma cutting torch height in the process, realize the control of cutting torch height.
5)Maintenance Skills:
1. Install the torch height controller correctlly.
2. Replace the consumbles in time before completely damaged.
3. Avoid the collision of the torch height controller.
4. Keep the connection threads clean.
5. Check if there are loose parts.
6)Competitive Advantage:
1. Professional manufacturer for CNC Cutting Machine Accessories
2. More than 16 years experience
3. Factory direct price and on time delivery
4. Secure Ordering and worldwide delivery
5. Sample available
6. Small quantity acceptable
7. OEM workable