Wew-100b Universal Testing Machine with PC Control

Model NO.: WEW-100B
Control: Manual Control
Weight: 100-500Kg
Power Source: AC220V
Oil Cylinder Position: Under
Relative Error: 1%
Max. Cpacity (Kn): 100
Measuring Range (Kn): 0 ~ 100
Trademark: TBT
Transport Package: Standard Export Packing
Specification: ISO9000
Origin: Nanjing, China
HS Code: 90158790
Model NO.: WEW-100B
Control: Manual Control
Weight: 100-500Kg
Power Source: AC220V
Oil Cylinder Position: Under
Relative Error: 1%
Max. Cpacity (Kn): 100
Measuring Range (Kn): 0 ~ 100
Trademark: TBT
Transport Package: Standard Export Packing
Specification: ISO9000
Origin: Nanjing, China
HS Code: 90158790
WEW-100B Universal Testing Machine with PC Control
1. Description
This series of products are mainly used for metal, nonmetal materials tensile, compression, bending, shear and other mechanical properties.
This series of products for the cylinder under, four column, double screw, double space frame structure, tensile and compressive spacing electric adjustment, clamp for hydraulic automatic, reliable clamping, convenient.There are built-in beam coil spring buffer device, which can effectively eliminate the transmission gap between the screw and nut, and play a good role in the sample buffer pull off.Configure the platform high toughness fence, the space between the test and the formation of the operator isolation, can effectively guarantee the safety of the operator.
 
2. Technical Data
Capacity:100KN
Accuracy class:Lever 1(0.5)  
Piston stroke(mm):200   
power(kW):2.2
Maximum speed of sentre sill(mm/min):280  
Compression space(mm):500
Tensile space(mm):600  
Structure type:Four-column, two-screw, hydraulic clamping
Diameter of round specimen(mm):Φ6-Φ22  
Diameter of flat specimen(mm):0-15
Maximum distance of bending test(mm):300  
Size of compression plates(mm):Φ110
Dimension(load frame)(mm):800×620×1850  
weight (control console)(mm):1100×750×900
Weight (load frame)):1450  Weight (load frame)(kg):200 WEW-100B Universal Testing Machine with PC Control
1. Description
This series of products are mainly used for metal, nonmetal materials tensile, compression, bending, shear and other mechanical properties.
This series of products for the cylinder under, four column, double screw, double space frame structure, tensile and compressive spacing electric adjustment, clamp for hydraulic automatic, reliable clamping, convenient.There are built-in beam coil spring buffer device, which can effectively eliminate the transmission gap between the screw and nut, and play a good role in the sample buffer pull off.Configure the platform high toughness fence, the space between the test and the formation of the operator isolation, can effectively guarantee the safety of the operator.
 
2. Technical Data
Capacity:100KN
Accuracy class:Lever 1(0.5)  
Piston stroke(mm):200   
power(kW):2.2
Maximum speed of sentre sill(mm/min):280  
Compression space(mm):500
Tensile space(mm):600  
Structure type:Four-column, two-screw, hydraulic clamping
Diameter of round specimen(mm):Φ6-Φ22  
Diameter of flat specimen(mm):0-15
Maximum distance of bending test(mm):300  
Size of compression plates(mm):Φ110
Dimension(load frame)(mm):800×620×1850  
weight (control console)(mm):1100×750×900
Weight (load frame)):1450  Weight (load frame)(kg):200

Radiant Heater With Thermostat

no noise
no central system to break down
no maintenance
5-6 hours on time for 24 hours heating due to mass heating not air.
50% to 70% electrical bill savings, and we have had cases of 78% over oil boilers.
extensive reduction in damp/condensation
healthy heating with no dust or bugs circulating in the air (non convection type heating)
helps with aching limbs, if you feel better when stepping into the sun, infrared is exactly the same.
space saving
low installation costs
5 year warranty

Radiant Heater With Thermostat,Infrared Radiant Electric Heaters,Radiant Panel Heater,Radiant Infrared Heater With Thermostat

Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com