Skystone Manual Horizontal Coring Drill Machine for Sale
Rubber Accelerator Masterbatch
Ningbo Actmix is committed to providing the best quality chemical solutions for automotive rubber sealing parts manufacturers.
Ningbo Actmix specialises in production the Actmix®Pre-dispersed rubber accelerators. We select the high-quality materials, combine with special formulation, adopt automatic and safety equipments to produce Actmix®Pre-dispersed rubber accelerators.
Granules size: diameter about 6mm, length 8mm.
1. Use mesh filtered the Actmix®Pre-dispersed rubber accelerator.
3. Dust free and lower water absorption.
4. Performance with: high activity, high dispersion and mixing high efficiency.
5. Easy kneading at lower temperature, especially for open mill mixing.
Actmix®Polymer-bound Pre-dispersed Rubber Accelerators, can meet RoHS, PAHs, Phthalates 6P, SVHC 181 (Substances of Very High Concern) requirements of regulation (EC) No.1907/2006 concerning the REACH.
Rubber Accelerator Masterbatch,Pre-dispersed Rubber Accelerator,Moderate Curing Speed Accelerator,Synthetic Rubber Accelerator Ningbo Actmix Rubber Chemicals Co., Ltd. , https://www.actmixchemicals.com
  TSY-HDC80M Manual Horizontal Coring Drill is designed for requirement of the stone mechanized mining, whcih is the mechanized stone mining drilling equirement .
  This machine is used for horizontal drilling operation in large rock stripping and blasting .Horizontal intersection hole drilling operation for wire saw cutting, and it can also do rock detection work .It is the ancillary using equipment for stone mining , large rock blasting and wire saw cutting .
Â
Remark :
  The total weight of machine is 1050kg (Including 15 drill pipes and 3 aiguille ) .
Â
Item No.
TSY-HDC80M
Bit DiameterÂ
φ76mm
Minimum Distance between Drilling Center And Ground
130mm
Main Motor Power
15kW
Rod Specification
 φ73 x 1500mm
Single Drilling Distance
1.5 m
The Min Pressure of Cooling WaterÂ
0.1 Mpa
Drilling SpeedÂ
2~8m/h
Working Conditon
-5~+45ºC
Introduction:
  TSY-HDC80M Manual Horizontal Coring Drill is designed for requirement of the stone mechanized mining, whcih is the mechanized stone mining drilling equirement .
  This machine is used for horizontal drilling operation in large rock stripping and blasting .Horizontal intersection hole drilling operation for wire saw cutting, and it can also do rock detection work .It is the ancillary using equipment for stone mining , large rock blasting and wire saw cutting .
Â
Remark :
  The total weight of machine is 1050kg (Including 15 drill pipes and 3 aiguille ) .
Â
Item No.
TSY-HDC80M
Bit DiameterÂ
φ76mm
Minimum Distance between Drilling Center And Ground
130mm
Main Motor Power
15kW
Rod Specification
 φ73 x 1500mm
Single Drilling Distance
1.5 m
The Min Pressure of Cooling WaterÂ
0.1 Mpa
Drilling SpeedÂ
2~8m/h
Working Conditon
-5~+45ºC