Understand the advantages and disadvantages of the spectrum analyzer

Understand the advantages and disadvantages of the spectrum analyzer Spectrometers have been widely used in agriculture, animal husbandry, food, and chemical industries in recent years due to their excellent transmission characteristics and ease of operation. This provides a vast space for scientific research and teaching, and then spectral analysis. What are the advantages and disadvantages of the instrument?

Spectrometer advantages:

1. The sampling method is flexible. The detection and analysis of rare and precious metals can save the loss caused by sampling.

2. The test rate is high, multi-channel instantaneous multi-point acquisition can be set, and real-time output through the calculator.

3. Non-destructive testing can be done for some mechanical parts without damaging the sample for nondestructive testing.

4. Faster analysis, more suitable for pre-fire analysis or field analysis, so as to achieve rapid detection.

5. The accuracy of the analysis results is based on the chemical analysis standards. Disadvantages of the spectrum analyzer 1. It is difficult to accurately detect non-metallic and metal-to-metal elements.

2. It is not the original method and cannot be used as an arbitration analysis method. The test results cannot be used as the basis for national certification.

3. Due to the relatively monopolized factors of the products of various companies, the purchase and maintenance costs are relatively high, and the cost performance is relatively low.

4. A large number of representative samples are required for chemical analysis modeling, which is obviously impractical for small batch sample testing.

5. The model needs to be constantly updated. The model will also change when the instrument changes or the standard sample changes.

6. The cost of modeling is very high, and the test cost of the three-element analyzer is relatively large. Of course, the test cost will decrease when a large number of samples are tested.

7. Affected by external or internal factors such as the parameters of the optical system, the curve nonlinear problem often occurs, which has a great influence on the accuracy of the detection result.

The above are some of the advantages and disadvantages of the spectrum analyzer. According to the survey of North and South instruments, a number of users who use this instrument have found that everyone thinks that it is accurate, portable, and fast, so I think this is the biggest advantage of the spectrum analyzer. .

Small Injection Machine

1. Vertical opening and closing mold and in-line screw injection for easy inlav and injection molding.


2. Small and exquisite, small footprint, suitable for most plant height.


Equipped with a light-adjustable upper template to facilitate mold installation and replacement;

3. Top-mounted pre-plasticized motor, high-precision transmission and reduced machine height, saving a lot of space in the factory;

4. Vertical hydraulic mold closing structure, fast and low power consumption during mold closing;

5. High-quality nitrided alloy steel pipe set, high wear-resisting and anti-reverse structure, long service life of screw;

6. The temperature control system adopts computer PID control, which is intuitionistic and easy to operate, and the material temperature is accurate

7. The hydraulic system adopts multi-stage pressure independent control, linear control of speed and temperature, precise control of injection glue, opening and closing mode and other actions to make the production injection stable, and the appearance of the product is beautiful;

8. The closed mode and the injection adopt the closed-loop feedback position information of the grating ruler, and the position control is more precise;

9. The electrical appliance is equipped with safety protection device to maintain the safety of the operator; and the fault alarm information display makes the maintenance easier and convenient;

10. The computer adopts large-screen LCD design, intuitive and easy-to-operate human-machine interface, and is free to switch between Chinese, English, Russian and Korean four languages; it can store 60 sets of mold parameter memory, and the production adjustment is easy and efficient.

small Injection molding machine manufacturer, mini vertical injection molding machine, injection molding equipment

Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com