How to extend the service life of garbage trucks?
A coffee grinder with a cone-knife grinder places a conical knife disk at the bottom of the machine, and then cooperates with the outer ring knife disk for grinding. The coffee powder produced in this way will be closer to granular, and at the same time, the water absorption path of the coffee particles will become longer, and it will take more time for the inside to contact the water, which will result in the coffee powder being released within the first time. The soluble substances are less, and the concentration will not be too high in a short time. Conical Coffee Grinder,Conical Burr Coffee Grinder,Small Conical Burr Coffee Grinder,Brim Burr Coffee Grinder Zhongshan Dippers Electric Co., Ltd. , https://www.cndippers.com
(1) Doing a good job of garbage trucks The walking period has a great deal to do with the length of service life of garbage trucks. Doing a good run-in period will reduce the amount of foot parts, improve the surface quality of the parts, improve their wear resistance, and lay a good foundation for prolonging the service life of garbage trucks.
(2) Start the engine correctly Before starting the engine, crank the crankshaft 30 40-40 revolutions before starting. The engine rotates in a cold state
After 2 minutes, the oil is no longer needed to reach each of the Kang's cohesive surfaces. If it is started in a hurry, the engine will inevitably be dry (or semi-dry) in a short period of time.
friction. The longer the stoppage time, the greater the start-up wear, the lower the engine wear, and the greater the start-up torque t. According to statistics, the starting wear accounts for about 50% of the total engine wear.
(3) Keeping the normal working temperature of the engine The normal working temperature of the engine refers to the temperature of the coolant within the range of 80-90°C. At this temperature, the engine parts wear minimal. To do this should:
1. Keep radiator and water jacket clear.
2. Keep enough coolant.
3. Keep the cooling system components and devices working properly.
4. Keep section judo normal.
5. The correct use of warmth device.
(4) Adhere to the car's speed
(5) Prevent overloading of the car.
(6) Preventing engine from detonation combustion
(7) Strengthen the maintenance in the use of automobiles.