Plastic Soft Test Tube with Rubber Tube Cap, Injection Tube
With the development of the steel structure market, the use of box beams in bridges, power stations, boilers, and high-rise buildings is increasing. Comparing from the stress point of view, the ratio of the torsional constant of the I-shaped interface and the box-shaped interface with the same cross-sectional area is about 1:500, and the ratio of the maximum torsional shear stress is approximately 30:1. And its "â–¡"-shaped cross-sectional form has high bending resistance under the action of bidirectional stress. In addition, from the overall stability, the box beam is also better than the I beam. Therefore, in a specific application, the box beam has its unique structural advantages, which can achieve better economic advantages. Box-Beam Production Line,Box Beam Line,Box Beam Welding Production Line,Box Beam Production Line Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com
BHM services:
1.We provide mould, OEM is available "according to the customers' drawings (material can be done according to customer's requirement).
2.We improve the finished product, customers can also according to the mold production of finished products.
3.We provide one-stop service, from design, production, service, etc.
4.If you have any request can contact us.
Product Name
Plastic test tube
Product Material
PP
Tooling Technology
Injection molding
Core/Cavity Steel
1.2344
Mold Base
LKM
Runner
Cold runner
Cavity No.
16
Mold Life
3 million shots
Hot Runner Brand
NA
Lead Time
35-40 working days
Mold hardness
HRC50-54
Ejector system
Ejector sleeve
Packaging
Fumigation-free wooden box
1.We have rich experience in making laboratory plasticwares moulds, for centrifuge tube, test tube, petri dish etc.
2.We can control well the precision dimension, surface polishing and ensure the tube's centrifugation available.
3.With years of experience in plastic injection mold manufacturing, we have rich experience in offering plastic injection mould.
Best Hope Mold &Â Plastic (Shanghai) Co., Ltd (BHM) focus on high precision Plastic Injection Molds design and developing, as well as custom injection molding.
BHM's Facilities:
BHM owns three facilities located in Shanghai and Suzhou, respectively focuses on High Precision Molds, Medium-sized Molds and Large Volume Molds.
Since established in 2005, BHM has been developing very fast, business expands rapidly due to quality products and serves, At present, BHM has covers an area of 10000m2 in total and owns 185 employees including 28 engineers, 110molds makers,10 QC personnel and many injection operators.
BHM's Capabilities:
1.BHM offer one-stop services from engineering design, tooling , to custom injection molding, as well as printing and assembly etc.
2.Design for manufacturability and efficient production is our primary objective.The mold drawings can be finished within 2-4 days then send to customer for checking before tooling.We are able to meet our customers' shortened lead time.All the necessary technical drawings will be sent to customers for future mold maintenance references.
3.Our high speed milling machine, EDM, WEDM and CMM optimize our tooling process and improve accuracy and efficiency of our mold to ensure customers can get quality product.
4.Our expertise in tooling leads to better results in molding.We have 11 injection machines for mold trial, mold validation and custom production.
5.We have enough experience working with materials such as:LDPE, HDPE, PP, ABS, PC, PS, PVC, PA, PMMA, POM, TPU, TPR, TPE ETC.
Scope of application:
This production line is suitable for the production of high-strength box beam structures where the diameter of the ventilation holes on the partitions in the main column is small, and the four sides of the partitions must be welded. Including the prefabrication and assembly welding of the main box, the prefabricated installation of the internal partition, the external corbel, etc.
Features:
1. Good quality and high efficiency.
2. Through careful and meticulous technical preparation and design of special paired tires, errors can be well controlled and construction difficulty is reduced. At the same time, the adjustment process of the group alignment is reduced, which not only ensures the quality, but also greatly improves the production efficiency.
3. The separator is welded by electro-slag welding, which improves the production efficiency, reduces the production cost, and solves the problem of difficult welding of the internal separator.