Nearly a week the new boat market rent (2010.11.18-11.24)
Ship type Million tons This week's price (US$ / day) Last week's price (US$ / day) The lowest this year (US$ / day) The highest this year (US$ / day) Giant Tanker New ship 29500 28500 28500 47000 Suez type oil tanker New ship 25000 25000 23000 29500 Aframax oil tanker New ship 18000 18000 17500 20000 Product Oil Tanker 10.5 18750 19000 17750 19750 Product Oil Tanker 8 15750 15750 15750 17000 Product Oil Tanker 4.7 12500 12250 11500 13500 Capesize Bulk Carriers 15 27000 28000 22000 34000 Capesize Bulk Carriers 17 30000 31000 24000 39000 Panama bulk carrier 7.5 21800 21500 21000 28000 Handy Bulk Carrier 5.3 18000 18000 15000 28000 Note: All the above transaction prices are red - up; green - down; black - flat, the data is not as any price evidence, for reference only!
Installation steps for SANY hydraulic cylinder seals
For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany Safe Seal Technology Co., Ltd. , https://www.jolseals.com
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.