Cold Plate Roll Bending Machine

Model NO.: R2M-500-II
Color: According to Customer′s Request
Rate of Production: 3-12 PCS/Min
Machining Diameter Tolerance: +/-0.5mm
Air Pipe Diameter: 10mm
Time of Change Mould: Less Than 10 Minutes (One Worker Operate)
Feeding Plate Location Set: Yes
Working Temperature: -5 & +65 Degree Centigrade
Delivery Time: 25 Working Days After Advance Payment
Trademark: FJC
Transport Package: Wooden Case with Soft Film Layer
Specification: 500
Origin: China
HS Code: 8462219000


Cold Plate Roll Bending Machine
 
Brief Introduction:
Hydraulic Automatic Two Rolling Plate Rounding Machine, the upper rolling is steel shaft, the under rolling is steel mandrel with stretchy rubber, adjust the distance between two rollings, when we start the machine, the rubber shaft will move down to the mandrel by two hydrocylinders. At the same time, due to the elastic distortion of rubber shaft, the steel plate will happen plastic distortion too.
Cold Plate Roll Bending Machine

Forming Principle:
Cold Plate Roll Bending Machine
Machining Results:
Cold Plate Roll Bending Machine

Advantage:
* Automatic taking out the cylindrical product
* Easy operation(manumotive/automatic/emergency-stop and etc), only need one worker.
* Once shaping
* Good roundness and etc.
The mandrel can be designed according to your requirements.
 
Main Technical Data:
Machining Material Carbon/Stainless Steel Diameter Tolerance ±0.5mm
Machining Diameter ¢100mm~¢750mm Seam Width 5mm~10mm
Machining Effective Length 200mm~500mm Axial Malposition Tolerance ±0.5mm
Plate Thickness Range 0.8mm~4mm    

Workshop:
Cold Plate Roll Bending Machine
Another Series:
Cold Plate Roll Bending Machine

 
If you are interested in our machine, please contact us for more information, welcome to contact us at any time, we will reply you as soon as possible!
 
 

Rectangle Trash Can

Rectangle Trash Can,Trash Can Rectangle,Stainless Steel Trash Cans,Stainless Steel Trash Can

Evergreen Houseware , https://www.jmelectricalappliance.com