Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Pernio Packaging Tube is a type of packaging tube used for various products such as creams, gels, ointments, and other semi-solid substances. It is made of high-quality plastic material, which is durable and flexible. The tube has a smooth surface, making it easy to apply the product without any wastage. It comes with a screw cap or flip-top cap for easy dispensing and secure storage. The Pernio Packaging Tube is available in different sizes and shapes, making it suitable for various types of products. It is also lightweight and easy to carry, making it an ideal choice for travel purposes.
Pernio Packaging Tube,Packaging Tube,Custom Tube Packaging,Squeeze Tube Packaging Suzhou Sanxin Tube Co.,Ltd. , https://www.zjpackagingest.com
PET Recycling Machine/PET flake/chip washing line/Pet Bottle Recycling Plant
Machine Brief info:
Generally refers to the use of PET bottles, after appropriate processing, reduction of material PET, for then made products, especially as the chemical fiber textile materials greater amount. As the PET bottle is widely used in beverage, food oil, due to health reasons, can only be used once, equipment so the recycled PET bottles have to attention. The bottle cap, bottle separation PET bottles on the drag is PE, can also be centralized treatment and recovery.Â
Â
2. Through crushing, washing and dry process, the waste bottle or sheet will become to be bottle flakes. The flakes are widely used in plastic industry, like sheet, and profile production.Â
3. The clean flakes can be used to produce the polyester staple fiber, PET strap band, granules, PET transparent film and sheets, etc. The top class flakes can be used to blow bottles again.
4. Recycling machine can be designed on the basis of how dirty the flakes are, and make sure of the quality of the final products are very clean.
5. Recycling machine output we can supply is from 500kg/h to 6000kg/h.
 Â
Machine Technical Characteristics:
Index
Parameter
PET flake size
8~12 mm
Moisture
< 1.5 %
Viscose
< 20 ppm
PP/PE
< 20 ppm
Metal
< 20 ppm
Other color PET flake
< 30 ppm
Label
< 20 ppm
PVC
< 30 ppm
Total impurities
< 100 ppm
PH
neutral
Bulk density
0.3g/cm3
2. Estimated Plant Parameters:
Capacity(kg/h)
Installation Power(kw)
Required Area(m2)
Manpower
500
220
600
8
1500
430
800
12
3000
650
1000
18
6000
1000
1400
30
Machine Process Flow Introduction:
Bottle bales→Bale Opening→Trommel Filtering→Label Removing→Bottle Pre-washing→Manual Sorting→Wet Crushing→Floating Washing→Drying→Hot Flotation Washer→Drying→Continuous Friction→Continuous Floating Washing→Drying→Label&Dust remover→Flake Optical Sorting→
Packing→Clean Flakes
Machine Equipment List:
De-laber
Bottle bale openingÂ
Belt conveyor
Put the material on the moving belt, which will convey the bottle into label remover
Trommel
Removing rock, stone, dust, loosen caps and small metals, especially, the iron will be removed by high speed
Bottle label separator
Removing labels from bottles
Manual Select working table
IF the label still in the bottle, worker can remove the label by hand
Crusher
Crush the material
Screw loader
Put the flakes into the Hot washer to clean
Floating washer
Cleaning flakes to remove chemicals and separating out rest labels and capsÂ
Hot washer
Connected with steam boiler. Steam is supplied into washing tank to heat water and flakes. Hot water makes waste; label and glue loosen from bottles
Friction washer
After crushing material from enters the mouth, through the high speed on the axis of the blade flap and spray water to the common function of good cleaning effect
Centrifugal dryer
Rejection the water from the flakes, moisture content is less than 2%
Pipe drying system
Hot air drying
PVC(label) separator
Used for the PET bottles, round and pressed bottles,effective more than 98%,save energy and labor,without water
Storage bunker
Storage materials
Machine photos as a reference:
Machine Packing details:
Working process:
About our service:
PET Bottle washing line Before-sale Â
During Manufacturing         Â
After-sale:
1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information
Why choose us:
1. Lower investment cost for a high quality and durable machine;Â
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: KWELL produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an KWELL recycling machine is 30 days.
Â
Please convenient yourselves by me !!
http://kwellgroup.en.made-in-china.com/
