Illumination box box results ensure light and constant temperature
The light incubator is an instrument specially developed by Zhejiang Top Instrument for agricultural research. The light incubator is fully controlled by a microcomputer. The research sets light and temperature for any period of time, provides sufficient sunlight for plant production, and provides equipment for agricultural scientific research. . The light incubator has five sides of the inner wall, some with a plate-shaped heating element, and others with a water jacket. Due to the use of a high-performance thermistor temperature regulator, the incubator maintains a constant temperature with high precision. Water jacket temperature adjustment accuracy is 0.1 degrees. The inner wall of the drainage incubator is made of stainless steel. The plate-shaped heating element is made of two electrodes sandwiched between imm-thick graphite plates to avoid disconnection. Long-term use, the resistance will hardly change. Because the temperature of heat generation is not high, long-term use is not easy to damage. Around the heating element is a soft urethane insulation material with a thickness of 3Omm and a 3Omm thick foamed styrofoam insulation material. The steel plate on the housing shell is sprayed with melamine amine resin paint, and the light incubator has an independent, movable aluminum alloy bracket. The bracket is generally divided into twelve layers. Each layer can be placed in an aluminum tray. The dish can hold dishes. Some equipment, after the removal of the bracket can be installed into a rotating incubator or vibration incubator, connected to the waterproof power socket in the light incubator, you can make dynamic training. The corners of the light incubator are rounded to facilitate cleanliness and disinfection. Scrubbing wastewater can be discharged through the drain valve. There is also a flat plate at the bottom of the light incubator, which can receive drops of water falling from the plate, rack, etc. Permanent magnets are installed around the inner surface of the outer door to keep the door seals as far as possible. The inner door is inlaid with 5mm thick tempered glass. The outer door is also equipped with a plate-shaped heating element over a large area to improve the heat preservation and to avoid the condensation of the inner door glass. 2-2.5 Ton Electric Pallet Truck
Zowell Electric Pallet Truck
with 2000~2500kg load capacity is a material handling equipment mainly used in
the transfer of materials in pallet inside and outside the production line and
warehouse. The pallet truck is only used for plane transportation for no
lifting mast. Although the pallet truck cannot lift the goods, but the purchase
and maintenance costs are quite lower than other forklifts.
Zowell XP electric pallet trucks are
equipped with AC drive motor and multi-functional handle, emergency switch, dual balance wheel as well as side
loading battery for safety, efficiency and less fatigue in
operation. Buffered pedal also extends the flexibility for various scenarios.
Detail
features
1. Multifunctional handle
2. Safety protection
3. Safety switch
4. Buffered pedal
5. Side loading and unloading of storage battery
6. Dual balance wheel device
7. AC drive
8. Lifting height limit
9. Multifunctional meter
10. High power pump station Used Electric Pallet Jack,Electric Pallet,Semi Electric Pallet Jack,Compact Electric Pallet Jack Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com
The multifunctional handle is imported from Germany. The operators can control
the moving speed easily through the use of the handle, which is equipped with
an emergency reverse button. This effectively protects the operator against
injury in the event of an accident. The handle can achieve braking in both vertical
horizontal positions, thus improving the tugger safety.
The soft PU armrest features a superior resistance to compression and impact,
thus reducing indirect hits and injury during stacker movement. This can
provide safety protection as well as comfort for the operators.
The power can be rapidly cut off in an emergency to ensure safety.
The foldable pedal saves space when the stacker is not in use. It features an
excellent shock absorption function, providing comfort for the operators, and
reduce working fatigue.
Side loading and unloading of storage battery makes maintenance and changing
easy. Users can select among different brands, including FAMM, GS, HOPPECKE,
and Trojan.
This device has a high passing ability because the running is stable.
The maintenance free AC drive motor has no carbon brush, no contacts, a large
torque and large output power. It uses a rear axle drive, providing perfect
power and gradeability.
The lifting height can be precisely controlled to reduce energy waste.
A multifunctional meter can display integrated electricity quantity, working time
and failure codes. The operators can know the running condition of the stacker
via the meter.
The 2.2kw high power pump station can provide a strong power for transporting
goods. The noise is low as well. The whole truck noise is lower than 70 dB.
