The main motor of the air compressor is often overheated and overcurrent?

As we all know, air compressors are heavy-duty equipment. When designing air compressors, air compressor manufacturers must achieve a high energy efficiency rating and control cost. The selected motor power has no amplification margin to meet the energy efficiency rating. Increase the cost advantage of producing air compressors.
In the initial production stage, because the air compressor is a new machine, the motor efficiency is high, the rotor moving parts are in good condition, the vibration is small, the friction resistance of each component is small, and the motor is output shaft power is also small, so the motor runs relatively easily.
After many years of operation, the efficiency of the motor will decrease compared with that before, and the gap between the mechanical components will increase. Under the same output gas flow rate, the motor current will increase, the heat generated by the motor coil will increase, and it will be easy to act as a motor over-motor and thermal overload protection. Seriously will burn the motor coil.
In view of the above situation, the following suggestions are made: 1. Lower the unloading pressure of the unit; 2. If the unit has the adjustment mode, modify the unit to use the adjustment mode; 3. Use certain measures to increase the heat dissipation of the main motor;

Self Recovery High Speed Door

Auto Recovery Rapid Door

Zippered Quick door Features

Open: 1.2-2.0m/Sec

High airtight energy efficient : Zipper patented technology and curtain rail technology combines high seal ability for maximum energy efficiency

Self-healing maintenance cost savings :When the door by the impact and dislocation occurs , repeat mosaic patented technology that is deralling repair system starts automatically , without any manual and automatic reset to its original state force to effectively reduce maintenance time saving cost

High security : Curtain soft and elastic , without any load at the bottom of the door to change , to ensure that the operator in an emergency state in the collision to the door when the operation will not cause harm

Push pull dual hinge system :unmatched safety record and absolute tightness in push pull twin shaft system, loading close dependence and the curtain at the bottom of the traditional fast door to achieve , you can drive dual axis system so that the upper curtain sprocket perfect bite does not depend on the door of its own weight can be achieved fast closing , this patented technology to avoid the hard parts usage of

More than one million times the durability performance : speed doors reduce the use of materials , easy to wear , strong and flexible curtain is very durable , can withstand million of opening and closing operation ,

in the use of some products has reached 500 million times for opening and closing

The soft curtain anti-collision fast door has simple structure design, which is beneficial to stable operation, reduces the frequency of repairing and replacing wearing parts, effectively improves the durability and service life of the equipment, and the curtain can be derailed in the event of an accidental impact, and during the ascent Automatic reset, no need to manually repair and reset the whole process.
Heating devices are included on both sides of the column.
The structural design of this product is characterized by trouble-free operation up to 150,000 times per year. It has the highest practicality and the lowest maintenance cost.


Self Recovery High Speed Door, air shower door, pharmaceutical clean room door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsd.com